VXDiag VCX Nano

Programs / Tools / Scripts
Posts: 131
Joined: Tue Oct 25, 2011 7:47 pm
Location: Vic

Re: VXDiag VCX Nano

Postby jxx » Thu Apr 01, 2021 3:46 pm

Tazzi wrote:Pulled mine apart to verify, does not have anything coming off of pin9 for GM UART.


Bugger.
That's why I purchased, needed something quick to do jobs while I waited for a new tech2 to arrive after the one I had died and other scantools I had access to didn't do what I needed.
The VCMII was the same, could use it for tec2win and as a j2534 device but no GM aldl, darn false advertising saying it works and doesn't........

User avatar
Posts: 999
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Fri Apr 02, 2021 4:39 am

jxx wrote:darn false advertising saying it works and doesn't........
[rant]
A pet peeve of mine ... I really dislike Liars, Cheats and Thieves and that is exactly what they are!
Especially when it comes to making a buck!

It is what it is, say what it is!

A perfect example where Capitalism trumps Democracy, for a Democracy to survive everyone must do their part, if you see a wrong you _must_ voice your opinion of that wrong, make it heard! or you are part of that wrong!
Too many, see in silence for fear of condemnation!
[/rant]
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

User avatar
Posts: 4456
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Fri Apr 02, 2021 9:09 am

yeh my vxdiag has nothing connected on pin9 from what i can see, it does connect to the board but i can't see any traces, it uses a ARM STM32F407 im guessing most cables are just using the cheapest CAN capable chip and saying that it can do everything :(

Looks like if that had used the STM32F413 they would have uart then.

Posts: 485
Joined: Thu Nov 03, 2011 7:57 pm
Location: perth wa

Re: VXDiag VCX Nano

Postby vs ss » Fri Apr 02, 2021 1:51 pm

AE571799-5712-4A8A-85B2-C799C1AF8186.jpeg
5D42A78E-CFFD-4C7F-98C6-78FCEF54C0BD.jpeg
Gampy,I do t know if these are the photos you want but I have a couple of mine.

User avatar
Posts: 999
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Fri Apr 02, 2021 3:10 pm

Thank ya sir!
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

User avatar
Posts: 4456
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Sun Apr 04, 2021 3:11 pm

my genuine one bought from vxdiag store is same as above.

Posts: 321
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VXDiag VCX Nano

Postby In-Tech » Sun Apr 04, 2021 4:06 pm

Mine too, I bought it to work with Tazzi's e38 stuff and it works great with his and pcmhammer and whatever so far. Of course I had to install all their BS with it. But if we are going to complain about bloated software installs...PCM hammer is ~ 80mb install to write a damit 512k file :mrgreen: I ain't plainin, it's coo as shite :afro:

User avatar
Posts: 999
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Sun Apr 04, 2021 5:22 pm

In-Tech wrote:But if we are going to complain about bloated software installs...PCM hammer is ~ 80mb install to write a damit 512k file :mrgreen: I ain't plainin, it's coo as shite :afro:

What the flock you talking about ... PcmHammer et al. isn't even 5MB!
PcmHammer15_SizeOnDisk.png
PcmHammer15_SizeOnDisk.png (9.78 KiB) Viewed 235 times
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

Posts: 321
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VXDiag VCX Nano

Postby In-Tech » Mon Apr 05, 2021 2:13 am

Well heck, I don't know wth I was looking at. I thought I checked out how big it was after install and evidently I was looking at something else...Sorry, you are correct, less than 5mb.

User avatar
Posts: 999
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Mon Apr 05, 2021 4:13 am

Must of had your beer goggles on ... :lol:
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 3 guests