Macchina

Programs / Tools / Scripts
User avatar
NSFW
Posts: 679
Joined: Fri Feb 02, 2018 3:13 pm

Re: Macchina

Post by NSFW »

Allpro firmware on the Maccina M2 would be really cool.
Or any other hardware, for that matter, but the M2 is still shipping, which counts for a lot.

I just noticed that Alex's GitHub repo is gone. :(
I have the firmware binaries, but I never did clone the repo.

Antus has a forked copy here: https://github.com/antuspcm/allpro

Apparently Alex made some changes a year or two after that repo was forked:
https://web.archive.org/web/20201022160 ... Net/allpro

I'm guessing those changes weren't too significant, but I'm not really sure... The fork happened around the time PCM Hammer work started, and the Allpro was already working at that point.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: Macchina

Post by MudDuck514 »

Hi all;

NSFW, none of the links on web.archive seem to be working for me.
It says the pages were NOT archived.

Mike
User avatar
NSFW
Posts: 679
Joined: Fri Feb 02, 2018 3:13 pm

Re: Macchina

Post by NSFW »

MudDuck514 wrote:Hi all;

NSFW, none of the links on web.archive seem to be working for me.
It says the pages were NOT archived.

Mike
Sorry, I should have been more clear - they don't work for me either.

One can only wonder what changes he made in between Antus' fork and removing the repo. But, I suspect it's not major, because we did a bunch of PCM Hammer development before those changes were made.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
Post Reply