Ve Software

Programs / Tools / Scripts
Post Reply
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Ve Software

Post by mattyjf01 »

VE ECU LINKER V0.12
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write

* Ecu write immobilizer code


*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER

*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER

*HVAC
-Single/Dual Zone programming

*SIC
-Sports/Standard mode programming
-Vin read/write

*IPC Series 1 and 2
- Config Read and write

*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters

*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box

Known OS:
92215367
92199077
12628463
12636356
12635020

This is still a work in progress.(some bugs ill work out after i get some more code locations)

If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version

*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write

*15/04/22 V0.04
-Added IPC Config programming

*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC

*12/03/23 V0.07
- Added Emulated Eeprom read and write

*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG

*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter
VE ECU Linker.png
VE ECU Linker.png (32.08 KiB) Viewed 8841 times
Swcan.png
Swcan.png (14.11 KiB) Viewed 8841 times
IPC.png
IPC.png (17.37 KiB) Viewed 13989 times
Last edited by mattyjf01 on Wed Feb 07, 2024 1:38 pm, edited 26 times in total.
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: Ve E77 E69 Code reader

Post by mattyjf01 »

Only tested on 2 E77's
and 1 E69
Please let me know Main os that dont work and if you have any bin files i can try
Thanks
Matt
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ve E77 E69 Code reader

Post by VX L67 Getrag »

I have a few of these ECU's lying around & if there's anything you'd like me to test I can... I haven't even opened up the software you've created with any of the E55, E69 or E77 but if you want me to test anything I can & will... I think I have around 5 good e55's & 3 or so of each of the E69 & E77's!

I've never had trouble with link & resetting though.
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: Ve E77 E69 Code reader

Post by mattyjf01 »

If you could test on E69 and E77
And post main os and if they worked
Thanks
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ve E77 E69 Code reader

Post by VX L67 Getrag »

Here you go sorry I lied I only have 1 e69 but it seemed to work.

I have 9x e77 & none of them came up with what e69 did so I think that may need a bit of work?
Attachments
e69 & e77 testing.zip
(525.84 KiB) Downloaded 327 times
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: Ve E77 E69 Code reader

Post by mattyjf01 »

Thanks
A lot more work :comp:
Are all the ecu's linked?
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ve E77 E69 Code reader

Post by VX L67 Getrag »

Yeah all still linked, just straight out of cars at wreckers!
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: Ve E77 E69 Code reader

Post by mattyjf01 »

VX L67 Getrag wrote:Yeah all still linked, just straight out of cars at wreckers!
Can you try the new version up the top then post the bin files
or email them to mattyjf01@hotmail.com
Thanks
Matt
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ve E77 E69 sram reader

Post by VX L67 Getrag »

Will do tomorrow!
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Ve E77 E69 sram reader

Post by VX L67 Getrag »

I only tested the first 4 again & here's the files...
Attachments
e77 take2 first 4.zip
(208.9 KiB) Downloaded 332 times
Post Reply