Ve Software

Programs / Tools / Scripts
Charlescrown
Posts: 1831
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: VE V6 ECU LINKER

Post by Charlescrown »

I'm always getting into trouble for bringing parts into the house. Lucky she loves me and just piles it up in my little office.
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: VE V6 ECU LINKER

Post by mattyjf01 »

I made a mistake.
The SPS function i thought was a relearn was an immobilizer(TDM) Flash update for the TDMS with an EEPROM chip

What ive noticed is when you turn the ignition off for more than 6 seconds, Next time you turn ignition on it broadcast the tdm immobilizer code on CAN ID 0x3C9
If ECU is reset or has P0633 (Immobilizer Key Not Programmed) set ecu will save immobilizer data

eg 4988EEFB567D34448341E151A57AB2A6F117 BF8F781C9531 C23EFD
"BF8F781C9531" = Crypto key
"C23EFD" = Key config password
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VE V6 ECU LINKER

Post by The1 »

perhaps problem i was having as i was programming then trying to start straight after instead of key on and wait. If it's cranking then perhaps it cancels it and doesn't resend so your left to then reset it and start again.
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: VE V6 ECU LINKER

Post by mattyjf01 »

Ill have to wait for a one to come in to try it out
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: VE V6 ECU LINKER

Post by mattyjf01 »

Code reader and Vin write not working on E39 Series 2
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: VE V6 ECU LINKER

Post by mattyjf01 »

E39 series 2 can be brute forced at 2 seconds a key (up to 5h 30m).
Must have a bcm connected.
No need to link just reset, will update immobilizer data on a power cycle.
Will be implemented in V0.08.
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: VE V6 ECU LINKER

Post by mattyjf01 »

V0.09
Read code from series 2 E39
In-Tech
Posts: 779
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VE V6 ECU LINKER

Post by In-Tech »

Hiya,
Where do you download V0.09? Original post shows V0.01
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: Ve Software

Post by mattyjf01 »

V0.10
- Added E38/E39 Emulated Eeprom read and write
Knackersjewels
Posts: 29
Joined: Thu May 05, 2022 8:24 pm
cars: 2x VZ alloytec
VY SS L98 ute
Location: Maffra, Vic
Contact:

Re: Ve Software

Post by Knackersjewels »

Can I get the updated link please mate? I was hoping you updated the file attached to the link you send out, but it's still 0.09
Post Reply