Delco OSE FlashTool V1.51

Programs / Tools / Scripts
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: The FlashTool V1.15

Post by Holden202T »

when the aldl passthrough is added to the flashtool that will allow tp4 and scanner pro to work together ... otherwise you still need to use the dos based antusprom

if antus can work out a plugin for TP5 there may be a light at the end of that tunnel too ... but that ain't going to happen for a while!
mag
Posts: 321
Joined: Fri Apr 03, 2009 9:21 am
cars: VN Commodore
Location: Blue Mountains NSW

Re: The FlashTool V1.15

Post by mag »

Have loaded flashtool v1.15 & started emulation. received cal from ecu & initialised TP5, flashtool "READY" & "TP Found" boxes are both illuminated. TP5 logging not working, clicking "acquire data connect/disconnect" has no effect. TP5 logging is ok if I use dos version of antusprom. what have I missed.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: The FlashTool V1.15

Post by Holden202T »

you have missed the part where we said logging doesn't work. only changing xdf data in TP5 will work with that connection.

If you want to log and change xdf data at the same time the dos antusprom is the only option.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: The FlashTool V1.15

Post by antus »

Note: To connect to an OSE v1.0.1 bin in a car with no BCM you must make sure "Options/Preferences/DisableBCM Chatter" is NOT selected.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Dec_head
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm
cars: VR Calais

Re: The FlashTool V1.15

Post by Dec_head »

Just checking to see if their was any further development with the logging tuning via usb aldl or tunerpro 5 integration.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: The FlashTool V1.15

Post by VL400 »

No, nothing further has been done with this. Once TP5's plug-ins are working something will be written to use that. Will make it much easier to setup too.
Tinker
Posts: 81
Joined: Sat Feb 13, 2010 12:37 pm

Re: The FlashTool V1.15

Post by Tinker »

Hi,

I am using autoprom and successfully connected to ecm , read cal etc with no problems. But when trying to modify xdf in the flex output editor I get a unknown error when writing xdf . green status blocks seem to get 3/4 of the way ...



any ideas ?
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: The FlashTool V1.15

Post by VL400 »

Can you email me the XDF? If I can reproduce the error should be able to fix it.
malser
Posts: 15
Joined: Thu Apr 29, 2010 10:48 pm
Location: Ukraine, Vinnitsa

Re: The FlashTool

Post by malser »

VL400 wrote: * Note - VS Ecotec and newer PCMs that have a 128k binary use a memory bank switching method.
The flash tool only supports reading and writing to bank 1, the first 64k. This means the 'Get Bin'
function does not get the entire binary.
I apologize in advance for my english. I have a question.
I know that my firmware is located in the 2 bank, 64k to the second (starting with address 8000 and end. 32k). Can I read them your program.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: The FlashTool V1.18

Post by kojab »

Hi malser. If you want to read from 0 to FFFF (64k) this program will work. You won't be able to read from 10,000 to 1FFFF

Cheers
Richard
Post Reply