Delco OSE FlashTool V1.51

Programs / Tools / Scripts
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Delco FlashTool V1.51

Post by delcowizzid »

so i need to swap from auto to manual in a vx can i just do a write cal of the manual vx bin on the auto ecu and happy days or nah
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VX L67 Getrag
Posts: 2873
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Delco FlashTool V1.51

Post by VX L67 Getrag »

VX-VY V6 flash pcm's are all the same just need to do a write entire & all is good!
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Delco FlashTool V1.51

Post by delcowizzid »

it wont wipe the bcm-pcm linking writing whole bin?
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VX L67 Getrag
Posts: 2873
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Delco FlashTool V1.51

Post by VX L67 Getrag »

yeah I guess it can as there is 2 sections for the link code, if you have the original bin & the 1 you want to change to I can copy it across for you or just disable VATs
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Delco FlashTool V1.51

Post by VL400 »

You can choose to write the EEPROM data that is specific to the vehicle at the end, choose no as a raw bin wont have that data. Do a full get bin choosing not to clear anything before you begin just in case you need the EEPROM data.

If you use a manual bin that is the same program as the auto bin could do a cal write only.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Delco FlashTool V1.51

Post by delcowizzid »

thanks all very much :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Delco FlashTool V1.51

Post by delcowizzid »

seems to have worked a charm bing bang boom no issues too easy legendary tool :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: Delco FlashTool V1.51

Post by hsv08 »

I cant seem to install framenet 3.5. i have .net 4.6.1? does this matter? i still cant seem to connect to my vx so this is last resort. have set up text bench and cant connect to that either
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Delco FlashTool V1.51

Post by VL400 »

The later framework is fine.
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: Delco FlashTool V1.51

Post by hsv08 »

VL400 wrote:The later framework is fine.
Hmmmm ok. That makes 2 flash pcms o can't connect too..
Post Reply