Delco OSE FlashTool V1.51
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: Delco FlashTool V1.51
Thanks for the help yesterday all. Much appreciated. Happy customer
- III ROMEO III
- Posts: 2
- Joined: Sun Jun 28, 2015 10:23 am
- cars: Holden commodore vx
- Location: Melbourne, Australia
- Contact:
Re: Delco FlashTool V1.51
nice work thank you
Re: Delco FlashTool V1.51
Hey all,
Having a bit of a problem here.
I've played with 808 ECUs in the past, but this is the first time on a 16233396 PCM out of a VT V6.
I've got a spare 16233396 and I've followed the "Clone PCM" instructions as found here: http://pcmhacking.net/forums/viewtopic. ... t=40#p6472. I'm not sure if the instructions are specific to VX & VY PCMs, but as the PCMs are the same 16233396, I figured that the instructions would apply to a VT as well.
I set my preferences as follows. The only deviation from the instructions is I select "Flash PCM Auto Fix Checksum", but I have tried both TRUE & FALSE Values and got the same outcome regardless:
And this is what I keep getting.
10:58:34 AM FlashTool Version 0.1.5.1 Program Loading...
10:58:34 AM Program Ready
10:58:37 AM User Options Loaded From System
10:58:41 AM Prest Options Loaded: Flash PCM in Vehicle
10:59:56 AM User Options Saved To System
11:00:00 AM Starting Connect To Device...
11:00:00 AM COM5 Open
11:00:00 AM Check if Logger V2 in partial passthrough mode
11:00:00 AM Not a logger V2
11:00:00 AM COM5 Port open already
11:00:00 AM Waiting For HeartBeat...
11:00:00 AM Found A HeartBeat Frame, Timer Started
11:00:01 AM Found Another HeartBeat Frame After 302mS
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F1
11:00:01 AM Chatter Disabled
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F7
11:00:01 AM No Response
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:04 AM Silence Detected
11:00:04 AM Requesting Chatter To Be Disabled For Device F7
11:00:04 AM No Response
11:00:04 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:04 AM Silence Detected
11:00:04 AM Requesting Chatter To Be Disabled For Device F7
11:00:04 AM No Response
11:00:04 AM No Devices Found
11:00:04 AM COM5 closed
11:00:04 AM COM5 already closed
Selecting the following preferences:
And I connect fine:
11:10:02 AM FlashTool Version 0.1.5.1 Program Loading...
11:10:02 AM Program Ready
11:10:04 AM User Options Loaded From System
11:10:09 AM Prest Options Loaded: VT Eco or S/C in Vehicle
11:12:16 AM User Options Saved To System
11:12:18 AM Starting Connect To Device...
11:12:18 AM COM5 Open
11:12:18 AM Check if Logger V2 in partial passthrough mode
11:12:18 AM Not a logger V2
11:12:18 AM COM5 Port open already
11:12:18 AM Waiting For HeartBeat...
11:12:18 AM Found A HeartBeat Frame, Timer Started
11:12:18 AM Found Another HeartBeat Frame After 305mS
11:12:18 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:18 AM Silence Detected
11:12:18 AM Requesting Chatter To Be Disabled For Device F1
11:12:18 AM Chatter Disabled
11:12:18 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:19 AM Silence Detected
11:12:19 AM Requesting Chatter To Be Disabled For Device F5
11:12:19 AM Chatter Disabled
11:12:19 AM Searching For OSE Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Found Something, But Not OSE Device...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker Devices...
11:12:19 AM Searching For Kalmaker SP3
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS00
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS20/WDS21/WDS30
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS40/WDS41/WDS60/WDS61/WDS70
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS65
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker WDS50/WDS51
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker WDSB3/WDSB4/WDSB5
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker BDS60
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Factory Devices...
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Unknown ECM/PCM Found, Trying A Different Mode
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:20 AM Silence Detected
11:12:20 AM Requesting Chatter To Be Enabled For Device F5
11:12:20 AM Chatter Enabled
11:12:20 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:20 AM Silence Detected
11:12:20 AM Requesting Chatter To Be Enabled For Device F1
11:12:20 AM Chatter Enabled
11:12:20 AM Found Factory VT PCM, Version: Factory
11:12:20 AM COM5 closed
Using these 2nd settings, which enabled me to connect, I was able to GET and save CAL, BIN, RAM & EEPROM, but never was the option to Write the BIN file available.
All this was done using the original PCM installed in the car.
I have also installed & connected to the replacement PCM which I'm wanting to use to clone a copy of the original, but I'm getting the same results as above, only being able to get the BIN, CAL etc... by connecting using the 2nd settings.
So now I have extracted and saved from each PCM the BIN, CAL, RAM & EEPROM using the 2nd connection method, but I have yet to figure out how to connect and write the original BIN to the spare PCM.
I also noticed that the "Device ID" in Preferences changed from F7 during the failed "Flash PCM in Vehicle" attempts, to F5 during the "VT Eco or S/C in Vehicle" successful connections, so I tried setting Vehicle to "Flash PCM in Vehicle" and changed "Device ID" to F5 and I was able to connect but I had no additional functionality compared to connecting with Vehicle set to "VT Eco or S/C in Vehicle".
What am I doing wrong?
Thanks
Having a bit of a problem here.
I've played with 808 ECUs in the past, but this is the first time on a 16233396 PCM out of a VT V6.
I've got a spare 16233396 and I've followed the "Clone PCM" instructions as found here: http://pcmhacking.net/forums/viewtopic. ... t=40#p6472. I'm not sure if the instructions are specific to VX & VY PCMs, but as the PCMs are the same 16233396, I figured that the instructions would apply to a VT as well.
I set my preferences as follows. The only deviation from the instructions is I select "Flash PCM Auto Fix Checksum", but I have tried both TRUE & FALSE Values and got the same outcome regardless:
And this is what I keep getting.
10:58:34 AM FlashTool Version 0.1.5.1 Program Loading...
10:58:34 AM Program Ready
10:58:37 AM User Options Loaded From System
10:58:41 AM Prest Options Loaded: Flash PCM in Vehicle
10:59:56 AM User Options Saved To System
11:00:00 AM Starting Connect To Device...
11:00:00 AM COM5 Open
11:00:00 AM Check if Logger V2 in partial passthrough mode
11:00:00 AM Not a logger V2
11:00:00 AM COM5 Port open already
11:00:00 AM Waiting For HeartBeat...
11:00:00 AM Found A HeartBeat Frame, Timer Started
11:00:01 AM Found Another HeartBeat Frame After 302mS
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F1
11:00:01 AM Chatter Disabled
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F7
11:00:01 AM No Response
11:00:01 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:01 AM Silence Detected
11:00:01 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:02 AM Silence Detected
11:00:02 AM Requesting Chatter To Be Disabled For Device F7
11:00:02 AM No Response
11:00:02 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:03 AM Silence Detected
11:00:03 AM Requesting Chatter To Be Disabled For Device F7
11:00:03 AM No Response
11:00:03 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:04 AM Silence Detected
11:00:04 AM Requesting Chatter To Be Disabled For Device F7
11:00:04 AM No Response
11:00:04 AM Waiting For 15ms Of Silence With 300ms Timeout
11:00:04 AM Silence Detected
11:00:04 AM Requesting Chatter To Be Disabled For Device F7
11:00:04 AM No Response
11:00:04 AM No Devices Found
11:00:04 AM COM5 closed
11:00:04 AM COM5 already closed
Selecting the following preferences:
And I connect fine:
11:10:02 AM FlashTool Version 0.1.5.1 Program Loading...
11:10:02 AM Program Ready
11:10:04 AM User Options Loaded From System
11:10:09 AM Prest Options Loaded: VT Eco or S/C in Vehicle
11:12:16 AM User Options Saved To System
11:12:18 AM Starting Connect To Device...
11:12:18 AM COM5 Open
11:12:18 AM Check if Logger V2 in partial passthrough mode
11:12:18 AM Not a logger V2
11:12:18 AM COM5 Port open already
11:12:18 AM Waiting For HeartBeat...
11:12:18 AM Found A HeartBeat Frame, Timer Started
11:12:18 AM Found Another HeartBeat Frame After 305mS
11:12:18 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:18 AM Silence Detected
11:12:18 AM Requesting Chatter To Be Disabled For Device F1
11:12:18 AM Chatter Disabled
11:12:18 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:19 AM Silence Detected
11:12:19 AM Requesting Chatter To Be Disabled For Device F5
11:12:19 AM Chatter Disabled
11:12:19 AM Searching For OSE Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Found Something, But Not OSE Device...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For RT Modified Factory Device...
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker Devices...
11:12:19 AM Searching For Kalmaker SP3
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS00
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS20/WDS21/WDS30
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS40/WDS41/WDS60/WDS61/WDS70
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:19 AM Device Found, Identifying...
11:12:19 AM Searching For Kalmaker WDS65
11:12:19 AM Searching For ECM...Attempt 1...
11:12:19 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker WDS50/WDS51
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker WDSB3/WDSB4/WDSB5
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Kalmaker BDS60
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Searching For Factory Devices...
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Unknown ECM/PCM Found, Trying A Different Mode
11:12:20 AM Searching For ECM...Attempt 1...
11:12:20 AM Request Sent
11:12:20 AM Device Found, Identifying...
11:12:20 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:20 AM Silence Detected
11:12:20 AM Requesting Chatter To Be Enabled For Device F5
11:12:20 AM Chatter Enabled
11:12:20 AM Waiting For 25ms Of Silence With 300ms Timeout
11:12:20 AM Silence Detected
11:12:20 AM Requesting Chatter To Be Enabled For Device F1
11:12:20 AM Chatter Enabled
11:12:20 AM Found Factory VT PCM, Version: Factory
11:12:20 AM COM5 closed
Using these 2nd settings, which enabled me to connect, I was able to GET and save CAL, BIN, RAM & EEPROM, but never was the option to Write the BIN file available.
All this was done using the original PCM installed in the car.
I have also installed & connected to the replacement PCM which I'm wanting to use to clone a copy of the original, but I'm getting the same results as above, only being able to get the BIN, CAL etc... by connecting using the 2nd settings.
So now I have extracted and saved from each PCM the BIN, CAL, RAM & EEPROM using the 2nd connection method, but I have yet to figure out how to connect and write the original BIN to the spare PCM.
I also noticed that the "Device ID" in Preferences changed from F7 during the failed "Flash PCM in Vehicle" attempts, to F5 during the "VT Eco or S/C in Vehicle" successful connections, so I tried setting Vehicle to "Flash PCM in Vehicle" and changed "Device ID" to F5 and I was able to connect but I had no additional functionality compared to connecting with Vehicle set to "VT Eco or S/C in Vehicle".
What am I doing wrong?
Thanks
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Delco FlashTool V1.51
its not a flash PCM it has an eeprom in it, you'd need an NVRAM in it to be able to write to it, of if not you can use an eeprom eraser/programmer to change whats on it.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Delco FlashTool V1.51
Holden202T wrote:its not a flash PCM it has an eprom in it, you'd need an NVRAM in it to be able to write to it, of if not you can use an eprom eraser/programmer to change whats on it.
Well that just spoilt the fun.
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
-
- Posts: 226
- Joined: Tue May 19, 2009 7:51 pm
- cars: Toyota Celica/VN Bash Car
- Location: Coffs Harbour, Australia
Re: Delco FlashTool V1.51
Hi guy been a while but just tried to download the current version v1.51 and Norton is flagging a WS.Reputation.1. Is anyone else have this issue?
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Delco FlashTool V1.51
Yes! Norton is a POS. Burn it with fire is my suggestion.ToyHicko wrote:Hi guy been a while but just tried to download the current version v1.51 and Norton is flagging a WS.Reputation.1. Is anyone else have this issue?
But you can tell norton to allow the file.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Delco FlashTool V1.51
Vl400, Just wondering ... some time ago (25/02/15) you made a version 1.52, which fixed display issues at non-default display resolutions (DPI), yet the version here is still 1.51. Oversight?
Joe.
Hmmm ... just noticed : Last visited:Sun Oct 04, 2015 12:31 pm
Joe.
Hmmm ... just noticed : Last visited:Sun Oct 04, 2015 12:31 pm
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Delco FlashTool V1.51
Yes, he is on a bit of a hiatis due to life circumstances. I have been in contact with him recently, he is ok but not sure when he will come back. For now do not expect a reply from him.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Delco FlashTool V1.51
Thanks, Antus.
I understand. He can take whatever time he needs, just glad to hear he's okay.
Joe.
I understand. He can take whatever time he needs, just glad to hear he's okay.
Joe.