Delco OSE FlashTool V1.51

Programs / Tools / Scripts
User avatar
Posts: 4972
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Delco FlashTool V1.51

Postby delcowizzid » Wed Mar 16, 2016 2:53 pm

so i need to swap from auto to manual in a vx can i just do a write cal of the manual vx bin on the auto ecu and happy days or nah
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 2453
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Delco FlashTool V1.51

Postby VX L67 Getrag » Wed Mar 16, 2016 3:12 pm

VX-VY V6 flash pcm's are all the same just need to do a write entire & all is good!

User avatar
Posts: 4972
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Delco FlashTool V1.51

Postby delcowizzid » Wed Mar 16, 2016 4:04 pm

it wont wipe the bcm-pcm linking writing whole bin?
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 2453
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Delco FlashTool V1.51

Postby VX L67 Getrag » Wed Mar 16, 2016 4:06 pm

yeah I guess it can as there is 2 sections for the link code, if you have the original bin & the 1 you want to change to I can copy it across for you or just disable VATs

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Delco FlashTool V1.51

Postby VL400 » Wed Mar 16, 2016 4:07 pm

You can choose to write the EEPROM data that is specific to the vehicle at the end, choose no as a raw bin wont have that data. Do a full get bin choosing not to clear anything before you begin just in case you need the EEPROM data.

If you use a manual bin that is the same program as the auto bin could do a cal write only.

User avatar
Posts: 4972
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Delco FlashTool V1.51

Postby delcowizzid » Wed Mar 16, 2016 5:02 pm

thanks all very much :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 4972
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Delco FlashTool V1.51

Postby delcowizzid » Thu Mar 17, 2016 12:12 pm

seems to have worked a charm bing bang boom no issues too easy legendary tool :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 328
Joined: Thu May 09, 2013 6:50 pm

Re: Delco FlashTool V1.51

Postby hsv08 » Sun Sep 04, 2016 7:37 pm

I cant seem to install framenet 3.5. i have .net 4.6.1? does this matter? i still cant seem to connect to my vx so this is last resort. have set up text bench and cant connect to that either

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Delco FlashTool V1.51

Postby VL400 » Mon Sep 05, 2016 11:48 am

The later framework is fine.

User avatar
Posts: 328
Joined: Thu May 09, 2013 6:50 pm

Re: Delco FlashTool V1.51

Postby hsv08 » Mon Sep 05, 2016 12:19 pm

VL400 wrote:The later framework is fine.

Hmmmm ok. That makes 2 flash pcms o can't connect too..

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 1 guest