Delco OSE FlashTool V1.51
Re: Delco FlashTool V1.51
Tazzi wrote:hsv08 wrote: I have connected all earths from the OBD port
Ahh... that is what was causing alot of problems.
What have you found there? I've heard the LS1 needs and extra for some scan tools.
Re: Delco FlashTool V1.51
Dylan wrote:Tazzi wrote:hsv08 wrote: I have connected all earths from the OBD port
Ahh... that is what was causing alot of problems.
What have you found there? I've heard the LS1 needs and extra for some scan tools.
I think that HSV08 was saying is he didnt have all the grounds hooked up together. Or the ground from the OBD to the main harness. Thats a 100% necesitty.
For the LS1's, I have 4 wires into them. Battery, Ignition, ground and comms. Never skips a beat

Re: Delco FlashTool V1.51
G'day ppl,
Search for this but couldn't find a definitive answer, can I clone a vx s/c memcal base pcm to a flashed based vx auto pcm?
Will it work? Would like to do this so I can write to it without having to get a NVRAM.
Search for this but couldn't find a definitive answer, can I clone a vx s/c memcal base pcm to a flashed based vx auto pcm?
Will it work? Would like to do this so I can write to it without having to get a NVRAM.
Re: Delco FlashTool V1.51
You will need to make a patch loom ( The1 wrote a guide for this) or repin the harness to suit the memcal based PCM.
Re: Delco FlashTool V1.51
I have been using the flash tool for quite a while now and the other day it wouldn't connect, So i went back and double checked the settings and i was unable to select com 2 in the drop down list.
I downloaded the latest version and it worked so i didn't think anymore about it. But i went to use it yesterday and it would not connect again and there is no com 2 in the drop down list.
Had anyone come across this before ?
I downloaded the latest version and it worked so i didn't think anymore about it. But i went to use it yesterday and it would not connect again and there is no com 2 in the drop down list.
Had anyone come across this before ?
- Holden202T
-
- Posts: 9564
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
Re: Delco FlashTool V1.51
if you have something else using the com port, like tunerpro etc it wont show up.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread

Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Delco FlashTool V1.51
Holden202T wrote:if you have something else using the com port, like tunerpro etc it wont show up.
Thanks, i did have tuner pro open when i tried.
Ill give it a go and see if i can get it to connect
Re: Delco OSE FlashTool V1.51
I cant get it to work just keeps coming up as no device found but i can run tunerpro of same aldl cable. I have gone into prefernces and selected the right comport and quick setup and even tryd selecting auto echo detect and still no conection
Somone help please lol
Somone help please lol
Re: Delco OSE FlashTool V1.51
Tunerpro closed when trying the flashtool? Any details on what car and ECU code type you are connecting to?
Who is online
Users browsing this forum: No registered users and 3 guests