Delco OSE FlashTool V1.51

Programs / Tools / Scripts
User avatar
Posts: 9914
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: The FlashTool V1.27

Postby Holden202T » Fri Aug 06, 2010 11:59 pm

my reg key as above, points to C:\WINDOWS\Microsoft.NET\Framework\ ... maybe have a look at the folder and see whats there .... might give some clues ....

User avatar
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm

Re: The FlashTool V1.27

Postby Dec_head » Wed Aug 11, 2010 9:36 am

Can the flash tool be used to reset air bag warnings program keyheads like a tech1 or tech 2 with the right commands.

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: The FlashTool V1.27

Postby VL400 » Wed Aug 11, 2010 9:50 am

Yep, if you know the command there is a function to send ALDL frames so can reset airbag lights .. viewtopic.php?f=13&t=156&start=60 .

Programming key heads would be hard with single ALDL frames, and I wont be adding the function to the flashtool as I dont feel its a feature thats really suitable for public use.

Posts: 327
Joined: Sat Mar 21, 2009 2:02 pm

Re: The FlashTool V1.27

Postby monaro308 » Tue Sep 07, 2010 2:17 pm

FINALLY back online and ready to punch the next Telstra tech that swears i have a problem with my landline.....wrooong,they f@#ked up at the exchange.
Anyways....d/l the latest V1.27.exe and netcfv35
When i try to run the program i get....OSE Enhanced Flash Tool v127.exe - application error
failed to initialize properly (0xc0000135) click ok to terminate the application.
Is this my computer or a problem with the exe file??
Just having a play around in this great melbourne weather :lol: before i'm off to work.
cheers...Mario

User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: The FlashTool V1.27

Postby Jayme » Tue Sep 07, 2010 2:31 pm

well... netcfv35 is the compact .net framework for windows mobiles :P

try this one: http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

youll probably need to scroll down the page and download the full package

Posts: 327
Joined: Sat Mar 21, 2009 2:02 pm

Re: The FlashTool V1.27

Postby monaro308 » Wed Sep 08, 2010 1:40 am

:lol: Thanks Jayme...d/loaded and all working now.
Thanks again :thumbup:

PS....still amazed at the work you guys are doing on here!

Posts: 411
Joined: Wed Mar 04, 2009 8:52 pm

Re: The FlashTool V1.27

Postby ejukated » Sun Sep 26, 2010 10:18 pm

is it normal to get bins with different contents everytime you use 'get bin' on a VX/VY flash pcm? Every time i use 'get bin' to read out the pcm and compare the files there are differences mostly in the same places through the bin. The differences seem to be in the eeprom area up to 0x2000?

User avatar
Posts: 495
Joined: Thu Sep 17, 2009 2:00 pm
Location: Perth, WA

Re: The FlashTool V1.27

Postby charlay86 » Mon Sep 27, 2010 12:22 pm

yes that should be fine, as those addresses access RAM (amongst other things) which the processor uses to store temporary data.

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: The FlashTool V1.27

Postby VL400 » Mon Sep 27, 2010 9:13 pm

In the next realease there is an option to fill the RAM, EEPROM and CPU registers with FF after doing a 'Get Bin'.

User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: The FlashTool V1.28

Postby VL400 » Tue Sep 28, 2010 4:07 am

Have updated the first post with the link to v1.28.The main change is the comms to try and make it more reliable and detect silence better.

- Listen to chatter now gets most data frames, it still misses some smaller frames. Set comm timeout to 100mS to show the bus data scheduling on vehicles with a few devices, dont forget to change it back to 300mS afterwards!
- Added TP5 flex table editing support
- Experimental auto echo detection (does not work well on vehicles with lots of bus chatter)
- Added option to clear the internal CPU registers when doing a get bin on flash based PCMs

PreviousNext

Return to Tools

Who is online

Users browsing this forum: MSN [Bot] and 1 guest