Possible VSS For Cable Speedo Cpnversions

Information and discussion of EFI hardware and specifications
User avatar
Posts: 4795
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Possible VSS For Cable Speedo Cpnversions

Postby delcowizzid » Thu Jun 04, 2009 2:24 am

well while researching for lada info for our french buddy I came accross this pic of the lada VSS for the delco ecu.and low and behold it has a cable output with a dust cap on it as well as the stock 3 wire pulse output setup .looks good for an easy swap for certian gearboxes with threaded speedo cable drives.availiabuility of the part is an unknown.

PICT0041.jpg
PICT0041.jpg (157.8 KiB) Viewed 6969 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 9674
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Possible VSS For Cable Speedo Cpnversions

Postby Holden202T » Thu Jun 04, 2009 9:11 am

degreaser ?? :P

Posts: 44
Joined: Sat Jun 06, 2009 8:56 pm
Location: Latrobe Valley, Vic.

Re: Possible VSS For Cable Speedo Cpnversions

Postby Rock_Lobster » Fri May 02, 2014 8:36 pm

These are on Ebay. Just search for Lada Niva Speed Sensor.
I have ordered one from Russia. Will see what it fits.

Rock Lob
If you can't be a good example, be a horrible warning.

User avatar
Posts: 6285
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: Possible VSS For Cable Speedo Cpnversions

Postby vlad01 » Fri May 02, 2014 9:00 pm

what about one of these?

Image
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

User avatar
Posts: 4795
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Possible VSS For Cable Speedo Cpnversions

Postby delcowizzid » Fri May 02, 2014 9:02 pm

price???
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 6285
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: Possible VSS For Cable Speedo Cpnversions

Postby vlad01 » Fri May 02, 2014 9:29 pm

never bought one, google search came up with this one

http://www.quadratec.com/products/95202_000.htm
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 44
Joined: Sat Jun 06, 2009 8:56 pm
Location: Latrobe Valley, Vic.

Re: Possible VSS For Cable Speedo Cpnversions

Postby Rock_Lobster » Sat May 03, 2014 7:16 pm

Looks higher quality than the Lada one. Then again, the Lada one was only $18 delivered.

Rock Lob
If you can't be a good example, be a horrible warning.

Posts: 44
Joined: Sat Jun 06, 2009 8:56 pm
Location: Latrobe Valley, Vic.

Re: Possible VSS For Cable Speedo Cpnversions

Postby Rock_Lobster » Sat May 03, 2014 8:57 pm

Here's a great source for VSS sensors that go between the gearbox and speedo cable, or splice into the speedo cable :- http://www.brantz.co.uk/sensors.htm

Rock Lob
If you can't be a good example, be a horrible warning.

Posts: 519
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

Re: Possible VSS For Cable Speedo Cpnversions

Postby Dazza92VP » Mon Jul 07, 2014 2:54 pm

found this might be good for anyone who cant hook into the cable for output
http://www.jegs.com/i/JEGS-Performance- ... Id=2461660

Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests