VE Instrument Cluster EEPROM Programming
45 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
- julespatch
- Posts: 15
- Joined: Fri Aug 25, 2017 5:28 pm
- Location: Adelaide
Re: VE Instrument Cluster EEPROM Programming
hey guys
thanks for all the great info. ive got a cluster here that i've read the eeprom on, changed the values and written back to the chip.. now i just want to power it on the bench to have a look but im going in circles trying to work out how to power it up.
what pins need to be connected? it's an aussie VE series 1 - 8184-26140-04 mainboard
cheers!
thanks for all the great info. ive got a cluster here that i've read the eeprom on, changed the values and written back to the chip.. now i just want to power it on the bench to have a look but im going in circles trying to work out how to power it up.
what pins need to be connected? it's an aussie VE series 1 - 8184-26140-04 mainboard
cheers!
Re: VE Instrument Cluster EEPROM Programming
Here are a few VE Series 2 Cluster BIN files if anyone has a need for them.
Series 2 VDO / Continental BLACK back instrument clusters - It also "Appears" that some very late Series 1 VE's were fitted with the Black Back VDO / Continental Clusters.
All BIN files are as Downloaded from good working Clusters - The VIN numbers in the BINS have been deleted but the rest of the file is untouched.
ALL are programmed for 2012 VE SSV UTE , 6.0 Litre ( L77 LS3 ) , 6 Speed Manual ( TR6060 ) , Full Sat Nav ( All STD MY12.5 SSV Ute options )
Also as an FYI - Series 1 VE clusters when programmed with a Tech2 will work fine in a Series 2 VE , Only issue I've seen is with the Navigation Pop Ups in the Cluster the font's are not right in a Series 2 and size up funny and often with odd characters in the display - Other than that issue the Series 1 dash works fine in a Series 2 vehicle - I've used several Series 1 clusters in my car and all without any issues (AFTER they have been configured with a Tech 2 ) other than the NAV pop ups - If you don't have Sat Nav you won't see any issues.
Series 2 VDO / Continental BLACK back instrument clusters - It also "Appears" that some very late Series 1 VE's were fitted with the Black Back VDO / Continental Clusters.
All BIN files are as Downloaded from good working Clusters - The VIN numbers in the BINS have been deleted but the rest of the file is untouched.
ALL are programmed for 2012 VE SSV UTE , 6.0 Litre ( L77 LS3 ) , 6 Speed Manual ( TR6060 ) , Full Sat Nav ( All STD MY12.5 SSV Ute options )
Also as an FYI - Series 1 VE clusters when programmed with a Tech2 will work fine in a Series 2 VE , Only issue I've seen is with the Navigation Pop Ups in the Cluster the font's are not right in a Series 2 and size up funny and often with odd characters in the display - Other than that issue the Series 1 dash works fine in a Series 2 vehicle - I've used several Series 1 clusters in my car and all without any issues (AFTER they have been configured with a Tech 2 ) other than the NAV pop ups - If you don't have Sat Nav you won't see any issues.
- Attachments
-
VE Calais Series 2 Dash_CONTROL_Munged_VIN.BIN
- (2 KiB) Downloaded 79 times
-
VE SS Series 2 Dash_CONTROL_Munged_VIN_HighKs.BIN
- (2 KiB) Downloaded 72 times
-
VE SSV Series 2 Ute Dash_CONTROL_Munged_VIN_LOW_Ks.BIN
- (2 KiB) Downloaded 72 times
- commodorenut
-
- Posts: 57
- Joined: Sun Jan 01, 2017 7:50 pm
Re: VE Instrument Cluster EEPROM Programming
Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any..
I have over 50 sedan ones, but no ute or wagon
I need to flash these onto a cluster so i can test my VE Canbus tool im making..
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any..
I have over 50 sedan ones, but no ute or wagon
I need to flash these onto a cluster so i can test my VE Canbus tool im making..
Re: VE Instrument Cluster EEPROM Programming
commodorenut wrote:Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any.. .
Let me know what Engine / Drive train Etc options you want on it and I'll program up a Series 1 dash in the car and I'll extract a bin file for you.
Re: VE Instrument Cluster EEPROM Programming
I know its a bit of an older thread but i whipped up a quick app that will convert your decimal odometer reading to the hex value you require based on ZerOne's Calculations.


- Attachments
-
VE_OdoCalc.zip
- (81.09 KiB) Downloaded 39 times
45 posts
• Page 5 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: Google [Bot] and 4 guests