Silicon Chip Magazine Sept 09 Wideband
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Silicon Chip Magazine Sept 09 Wideband
Hi all,
The current Silicon Chip Magazine (Sept 09) has a DIY wideband project. Uses the BOSCH Wideband LSU4.2 sensor.
FEATURES :-
* Accurate lambda measurements
* Pre-calibrated sensor
* S-curve output
* S-curve response rate adjustment
* Heat indicator LED
* Data indicator LED
* Engine started detection option
* Correct sensor heat-up rate implemented
* Heater over current and undercurrent shutdown
* Optional fast heat-up if correct conditions are met
Worth a read out of interest. Has a good explanation of how wide and narrow band oxygen sensors work.
Rock Lob
The current Silicon Chip Magazine (Sept 09) has a DIY wideband project. Uses the BOSCH Wideband LSU4.2 sensor.
FEATURES :-
* Accurate lambda measurements
* Pre-calibrated sensor
* S-curve output
* S-curve response rate adjustment
* Heat indicator LED
* Data indicator LED
* Engine started detection option
* Correct sensor heat-up rate implemented
* Heater over current and undercurrent shutdown
* Optional fast heat-up if correct conditions are met
Worth a read out of interest. Has a good explanation of how wide and narrow band oxygen sensors work.
Rock Lob
If you can't be a good example, be a horrible warning.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Silicon Chip Magazine Sept 09 Wideband
whats it cost ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Silicon Chip Magazine Sept 09 Wideband
No price as yet.
Part 2 is in next month's mag.
Rock Lob
Part 2 is in next month's mag.
Rock Lob
If you can't be a good example, be a horrible warning.
- Six_Shooter
- Posts: 163
- Joined: Wed Aug 05, 2009 2:06 pm
- cars: 2005 Dodge Dakota - For Sale
2000 GMC Yukon - The Daily driver
1985 GMC Jimmy S-15 - Under reconstruction
1973 Datsun 240Z - Toy, uses GM EFI.
Re: Silicon Chip Magazine Sept 09 Wideband
Anyway to get an electronic copy of the article? Some of us are halfway around the world.
2005 Dodge Dakota - The daily
1985 GMC Jimmy - A work in progress
1973 Datsun 240Z - The Toy, turbocharged and injected using GM EFI, and code59
If you're not living on the edge, you're taking up too much space.
1985 GMC Jimmy - A work in progress
1973 Datsun 240Z - The Toy, turbocharged and injected using GM EFI, and code59
If you're not living on the edge, you're taking up too much space.
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Silicon Chip Magazine Sept 09 Wideband
I'll see what I can do
If you can't be a good example, be a horrible warning.
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Silicon Chip Magazine Sept 09 Wideband
Part 2 is in the OCTOBER '09 Silicon Chip Magazine out now.
The kit, which is the board and case only, is $79.95 from Jaycar.
Part 3 will be in the NOVEMBER '09 Mag. This covers the separate display module, which is ~$59.95 from Jaycar.
So, it's probably the cheapest way to get into wideband.
The Techedge is dearer, but is capable of datalogging onboard. The Techedge display is connected digitally, where the silicon chip one measures the voltage output of the wideband controller.
Reading the article, I would guess that the Techedge would be faster too.
Still, The Silicon Chip unit would be great for tuning, and should be very accurate.
Worth a look.
Rock Lob
The kit, which is the board and case only, is $79.95 from Jaycar.
Part 3 will be in the NOVEMBER '09 Mag. This covers the separate display module, which is ~$59.95 from Jaycar.
So, it's probably the cheapest way to get into wideband.
The Techedge is dearer, but is capable of datalogging onboard. The Techedge display is connected digitally, where the silicon chip one measures the voltage output of the wideband controller.
Reading the article, I would guess that the Techedge would be faster too.
Still, The Silicon Chip unit would be great for tuning, and should be very accurate.
Worth a look.
Rock Lob
Last edited by Rock_Lobster on Wed Oct 07, 2009 8:42 am, edited 1 time in total.
If you can't be a good example, be a horrible warning.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Silicon Chip Magazine Sept 09 Wideband
so $76 for controller $56 for display then you just need a wideband oxygen sensor ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 44
- Joined: Sat Jun 06, 2009 8:56 pm
- cars: EH Ute with soon to be VK EFI
- Location: Latrobe Valley, Vic.
Re: Silicon Chip Magazine Sept 09 Wideband
Yep ( I revised the prices, as I was going off memory at the time).
The article lists Techedge as a source for the sensor and connectors, as well as Bosch & Audi/VW part numbers.
Techedge have a nice ad for their 2Y1 halfway through the article. As a comparison, the 2y1 DIY kit is $99 + GST,
and the LD02B DIY display kit is $49 + GST.
Techedge list the Bosch LSU sensor at $97 + GST
Rock Lob
The article lists Techedge as a source for the sensor and connectors, as well as Bosch & Audi/VW part numbers.
Techedge have a nice ad for their 2Y1 halfway through the article. As a comparison, the 2y1 DIY kit is $99 + GST,
and the LD02B DIY display kit is $49 + GST.
Techedge list the Bosch LSU sensor at $97 + GST
Rock Lob
If you can't be a good example, be a horrible warning.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Silicon Chip Magazine Sept 09 Wideband
i still prefer the LC-1 at $220 (plus post) with sensor and all assembled
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Silicon Chip Magazine Sept 09 Wideband
part of the article is on their website:
http://www.siliconchip.com.au/cms/A_111598/article.html
but the NAW_7s with its 4 digit display and tiny case, minimal assembly at 100usd still wins
http://www.siliconchip.com.au/cms/A_111598/article.html
but the NAW_7s with its 4 digit display and tiny case, minimal assembly at 100usd still wins