How to setup of Knock Sensor for VN V8

Information and discussion of EFI hardware and specifications
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: How to setup of Knock Sensor for VN V8

Post by vlad01 »

immortality wrote:Bahhh, I was never fan of the Walkinshaw model, to much body kit for me, wouldn't mind getting hold of the intake manifold though, there still isn't much better for an EFI Holden V8.

Just read the bin and upload it here on the website.

yeah I thought it was one of those models where people pinch parts from it to use for their projects.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
eckermannk
Posts: 50
Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0

Re: How to setup of Knock Sensor for VN V8

Post by eckermannk »

im just gunna pinch the knock board. Ill send the chip onto anyone who has the capability to get the tune out of it and put it up on the forum.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: How to setup of Knock Sensor for VN V8

Post by VL400 »

If the silver sticker stuck to the EPROM in the memcal is AMBX6968 then the bin is in the MemcalID tool :thumbup:
eckermannk
Posts: 50
Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0

Re: How to setup of Knock Sensor for VN V8

Post by eckermannk »

The Delco sticker is AMBX7274
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: How to setup of Knock Sensor for VN V8

Post by immortality »

That is a new one. Definitely need to get that read and posted on the website.
eckermannk
Posts: 50
Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0

Re: How to setup of Knock Sensor for VN V8

Post by eckermannk »

Quite happy to send it to someone that is capable to do it. Could I do in myself with the setup i have?
eckermannk
Posts: 50
Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0

Re: How to setup of Knock Sensor for VN V8

Post by eckermannk »

Knock sensor and board installed :thumbup:

Now what parameters do i need to switch and and setup?

Map A: set=Knock logging enabled. = SET

Any others
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: How to setup of Knock Sensor for VN V8

Post by antus »

I can read AMBX from the chip, pm sent.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: How to setup of Knock Sensor for VN V8

Post by delcowizzid »

set ESC params - Coolant temp enable in scalers to a lower temp 40 degrees or something
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply