Injector Flow Testing Data

Information and discussion of EFI hardware and specifications
Post Reply
v6bucket
Posts: 761
Joined: Tue Jul 21, 2009 10:02 am

Re: Injector Flow Testing Data

Post by v6bucket »

The1 wrote:i checked on two i have here and both just spin the whole barrel, to get the tip off id need something to grip the barrel. Ill prob just cut the tip on this one with hacksaw :shh:
The end cap has 2 crimped sections on it to stop it unscrewing in service, just touch those areas on the grinder, then they should screw off.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Injector Flow Testing Data

Post by VX L67 Getrag »

DAMN I was hoping I had some to test as I thought I had a set from a VN, but the oldest 1's I have are 790 & 973!
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

got it off as above and with some heat, must be sunday goop special, there prob good as you say for a racecar, that jet in the middle is pretty solid though, it's still atomizing

User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Injector Flow Testing Data

Post by delcowizzid »

awesome cheers mate much appreciated
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

also either 43psi or 51psi didn't really change flow.
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Injector Flow Testing Data

Post by Jayme »

So I spose the next question is will a set of 6 flow close to the same as each other.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

willing to donate? :lol:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Injector Flow Testing Data

Post by delcowizzid »

ive thrown so many of these away LOL ill uncap a set for the daily LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

I'll get the cap off the second and compair
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Injector Flow Testing Data

Post by Holden202T »

i'll have a look and see if I have any to donate :)
Post Reply