Injector Flow Testing Data

Information and discussion of EFI hardware and specifications
OZ38
Posts: 288
Joined: Wed Jul 01, 2009 7:18 pm
cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.

Re: Injector Flow Testing Data

Post by OZ38 »

The1 wrote:I think they were mainly OEM to some Volvo models, so prob why there not widespread.
Ok well how about I send them your way for testing & if they seem ok I will use them, if they're no good, well I don't know what to do with them then.
I would pay you of course. Not going to on sell them if they are going to hurt some poor guys build.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

Would be interesting to see I think you still have my details
OZ38
Posts: 288
Joined: Wed Jul 01, 2009 7:18 pm
cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.

Re: Injector Flow Testing Data

Post by OZ38 »

The1 wrote:Would be interesting to see I think you still have my details
Yes. .
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

Tested OZ38's 0280155968 injectors and they look like their genuine, i can't prove otherwise. Spray pattern is V pattern, markings are same as genuine, see photos, 777 VT injector on right, 968 middle and fake 968 on left. Markings on plastic body and assembly and also markings inside the nozzle. Genuine Volvo part number on the body and also Genuine ones from what i have read have only one rail clip slot, coil resistance is the same as genuine unit, the fake ones have lower resistance. Im not sure why one has numbers melted out but it performs identical. I wont do any further testing, finding these are rare, prices otherwise not worth it compaired to say denso units i have been using.

Here's the 100% Flow rate for them

41.89LB - 440cc @ 43.50psi 3bar
46.46LB - 488cc @ 51.5psi 3.5bar
48.35LB - 508cc @ 58psi 4bar

You can also see my fake injector testing routine here which is one way ive proven 100% of time so far if they are or not
[youtube]http://www.youtube.com/watch?v=X7CfPe-P_9Y[/youtube]
Attachments
968flowtest.jpg
968flowtest.jpg (163.42 KiB) Viewed 9294 times
_MG_1863.JPG
_MG_1861.JPG
_MG_1860.JPG
_MG_1859.JPG
_MG_1858.JPG
OZ38
Posts: 288
Joined: Wed Jul 01, 2009 7:18 pm
cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.

Re: Injector Flow Testing Data

Post by OZ38 »

Nice work. Thanks for the help to check them out Nigel. Got to be happy with those results :-)
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

Yes lucky you, surprising.
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: Injector Flow Testing Data

Post by L67PSI »

Hi The1, would you be interested in testing the AliExpress GT850 fuel injectors?

Link - https://www.aliexpress.com/item/New-Bra ... 0.0.ZDBxv6

Or has anyone else had experience with these?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

I havnt been able to get ahold of one with the multi hole spray head but only with the single hole, wasn't anything exciting typical cheap rubbish
User avatar
Tre-Cool
Posts: 265
Joined: Tue Oct 16, 2012 12:17 pm
cars: VY SS UTE, VX Drag Car
Location: Perth
Contact:

Re: Injector Flow Testing Data

Post by Tre-Cool »

you still doing injectors mate. where abouts are you located?

have you by chance done any of the bosch "2000" cng injectors before?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

yeh rig is still here with a bit of dust, done plenty of those, ill pm you my details.
Post Reply