Injector Flow Testing Data

Information and discussion of EFI hardware and specifications
User avatar
DanWA
Posts: 56
Joined: Fri Jan 31, 2014 1:14 pm
cars: LS1 LX Torana, VX2 R8 15th Anniversary, VT Wagon L67
Location: Southwest W.A
Contact:

Re: Injector Flow Testing Data

Post by DanWA »

Glad i found this, so who am i sending my injectors to? The local places want crack money haha
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

it's a black art isn't it? :lol:
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Injector Flow Testing Data

Post by Dylan »

Have something weird on my own car. 2000rpm 50kpa.
One day VE is lean next day it's rich.

Modified 304 blue too injectors factory pump and reg.
Never been able to narrow down where the variation comes from.
Possibly the reg?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Injector Flow Testing Data

Post by delcowizzid »

weather is the biggest contributer hence closed loop BLM's that change every day but not generally at one rpm range could well just be injection pulsewidth correction out for a certian pulsewidth
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Injector Flow Testing Data

Post by Dylan »

Was pretty tight at that rpm maybe 1800 2000 40 50 kpa. I just lived with it wasn't much in it maybe. 5 afr.
Whole table was very close. It's in the 12P custom thread VR288 think it called.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

with MAF setups ive seen 15% swings at times between winter and summer temps.
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Injector Flow Testing Data

Post by vlad01 »

mine are rock steady regardless of weather. only place it varies a little is idle AFRs. not much, probably only 0.2-0.5 AFR from day to day. As soon as its off idle is virtually perfect everywhere.

I got my injectors done by The1 so i have it all calibrated.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Xfirez51
Posts: 60
Joined: Sun Apr 07, 2013 12:09 am
cars: 1992 ZR-1

Re: Injector Flow Testing Data

Post by Xfirez51 »

Anyone here use an IAT sensor? Those tables help adjust fuel flow based on air temps.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Injector Flow Testing Data

Post by The1 »

on ours here it's spark adjustment on MAF based pcms.
Post Reply