Ive seen this come up in various places, so thought at $10 each off aliexpress id buy a couple and test them. I chose one that looked genuine, but alas they just use genuine photos to get the sale, most of the forums i had read also said these didn't pass @ 70psi line pressure like the genuine bosch's would.
These were ment to be 0280156280 which are 42LB @ 51psi or 3.5bar
I tested the 3 of them @ 51psi, 13.8volts, 6000rpm @ 8ms for the first row and 2500rpm @ 3ms for the second, as you can see no hope in hell of getting a matched pair there. Also of note the spray patterns were all different.
CC/Min
1 348.23 52.64
2 361.14 56.55
3 383.45 66.97
Deadtime @ 13.8volts
1 0.56
2 0.51
3 0.48
Deadtimes nothing good there.
Testing @ 100% DC
51PSI 77.71G/15s 41.11LB/Hr
70PSI 89.20G/15s 47.19LB/Hr
So these did work @ 70psi.
Overall you get what you pay for lol
Chinese Injectors Testing
Re: Chinese Injectors Testing
simple coil setup, ill have to get the grinder out and cut it in half and see if i can get inside.
- Attachments
-
- IMG_9697.jpg (54.68 KiB) Viewed 7274 times
-
- Posts: 3416
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: Chinese Injectors Testing
LOL, we have a definitive answer about chinese injectors now.
Did you test the coil resistance of each injector?
Did you test the coil resistance of each injector?
Re: Chinese Injectors Testing
Yeh coil resistance was fine
14.535
14.780
14.757
ive chopped one up now, you can see the spring moves inside and draws the shaft at the end up and down it has a ball tip on it
14.535
14.780
14.757
ive chopped one up now, you can see the spring moves inside and draws the shaft at the end up and down it has a ball tip on it
- Attachments
-
- IMG_9713.jpg (1.56 MiB) Viewed 7267 times
- Circlotron
- Posts: 235
- Joined: Mon Apr 25, 2011 4:12 pm
- cars: VP 5L LPG
Re: Chinese Injectors Testing
Could be a lot worse e.g. have counterfeit Bosch name on the side. It's not so bad if you actually know you might be buying rubbish, but when you pay for a brand name and get junk that's different.
Re: Chinese Injectors Testing
yeh you get what you pay for, you could buy a heap and try and get a half decent flow matched set but still all the spray patterns are all over the place, by the time you did that you may as well have bought the genuine thing, but yeh they do work and the flow the rated amount but everything else is up the creek
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Chinese Injectors Testing
this is exactly what I suspected. One of the main reasons I risked and went for a Deka OEM replacements over new Bosch ones as none of the ones I could find were genuine German made Bosch. Glad I did as I got the results from The1 and they were very good for non matched set.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8238
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Chinese Injectors Testing
Good research, thanks for posting up the results.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Tre-Cool
- Posts: 265
- Joined: Tue Oct 16, 2012 12:17 pm
- cars: VY SS UTE, VX Drag Car
- Location: Perth
- Contact:
Re: Chinese Injectors Testing
good job on testing the injectors out. Glad I skipped out on buying a set of these recently.