Alternative EEPROMs
Re: Alternative EEPROMs
I'll go 20
Re: Alternative EEPROMs
Would this be a recomended socket for these? Bit dearer than I expected. But the other end of the scale is 80c so guess it's same old story get what you pay for.
http://www.jaycar.com.au/Active-Compone ... t/p/PI6466
http://www.jaycar.com.au/Active-Compone ... t/p/PI6466
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Alternative EEPROMs
Yeah thats right, and its also the better quality machined type. Quality matters as they grip the pins tightly and make good reliable electrical contact. Low quality sockets and movement on the pins in a high vibration environment can introduce electrical noise which will can crash your engine computer while your engines running. Not ideal. Spend enough and keep the quality up. Not specifically sockets but high vibration environments and often high/variable temperatures in cars (and also unstable non-smooth power) are a different ball game for electronic projects. Very harsh environment. For the most part Industrial/Military spec are the go. I would be confident those sockets will do you well from the description.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Alternative EEPROMs
How's this look? It states machined pins and $1.10? Sounds to cheap.
http://au.rs-online.com/web/p/dil-sockets/0813187/
http://au.rs-online.com/web/p/dil-sockets/0813187/
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Alternative EEPROMs
Its hard to say. Maybe? If you buy some test how tight the fit is and report back.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Alternative EEPROMs
not only that... the machine drilled sockets have more room for the tip of your iron to solder the damn thing on!
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Alternative EEPROMs
The ebay ones I linked above came though. As expected they're chip pulls, of varying colour and age. All winbond @ 45ns. Ive tested several of them (including some of the hardest ones to get out) and they all passed. GQ log shown. The one which failed was not sitting in the programmer well. I re-socketed it in the ZIF socket and it came out fine. They also were all blank, which backs that they have been tested after being removed from the computers or equipment from which they were pulled. 50 chips, $108au at the other weeks exchange rate.
I also tested the signed GQ v2.01 windows 10 drivers and flashed on windows 10 without trouble. Note that there is now a new GQ-4x4 model which is not compatible with the older ones and has different drivers too. The windows 10 signed v2.01 drivers are hidden half way down the official driver page @mcumall.com for the GQ model most of us have. They also report v2.00.
I also tested the signed GQ v2.01 windows 10 drivers and flashed on windows 10 without trouble. Note that there is now a new GQ-4x4 model which is not compatible with the older ones and has different drivers too. The windows 10 signed v2.01 drivers are hidden half way down the official driver page @mcumall.com for the GQ model most of us have. They also report v2.00.
Code: Select all
Ready
H/W Re: GQ-4X Re-1.40(SW Re. 6.38)
USB Driver Re.2.0
Software Re. 6.38
Checking new software on server...
This software is updated already.
<<W27C512>>
ID check OK
Blank checking... Buffer
Elapsed time: 2.27 seconds.
Chip is blank
s:\ecu\vs\bmzc_mod_wideband\bmzc_mod_wideband.bin.
ID check OK
Writing... Buffer
Elapsed time: 22.76 seconds.
Device write completed OK
ID check OK
Verifying... Buffer
Device is verified
Elapsed time: 3.85 seconds.
ID check OK
Writing... Buffer
Elapsed time: 22.77 seconds.
Device write completed OK
ID check OK
Verifying... Buffer
Device is verified
Elapsed time: 3.69 seconds.
ID check OK
Writing... Buffer
Elapsed time: 22.76 seconds.
Device write completed OK
ID check OK
Verifying... Buffer
Device is verified
Elapsed time: 3.69 seconds.
ID check OK
Verifying... Buffer
Verify Failed, Address=0x000000, Device=0xFF, Buffer=0x00
Verify Failed <---- not good contacts in GQ, re-seat and re-test same chip next...
Elapsed time: 9.02 seconds.
ID check OK
Blank checking... Buffer
Elapsed time: 2.27 seconds.
Chip is blank
ID check OK
Writing... Buffer
Elapsed time: 22.76 seconds.
Device write completed OK
ID check OK
Verifying... Buffer
Device is verified
Elapsed time: 5.66 seconds.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Alternative EEPROMs
Good to see you had a win on that one good buying for sure.
How long will that stash last you?
How long will that stash last you?
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Alternative EEPROMs
Forever... i still have some new winbonds from the1s last bulk buy. Im just a hoarder and want to be sure i wont run out
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396