HI folks, not sure if this is the correct section for this -
i have a toyota surf with a vt v6 series 2, it does not have a diagnostic plug or an engine check light, i bought the vehicle already converted
i want to know how to fit them as i am having issues with the engine, and need to get it checked Any help will be muchly appreciated
cheers Mark
how to install a diagnostic plug VT V6 in a toyota surf
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: how to install a diagnostic plug VT V6 in a toyota surf
Get the wiring diagram from the wiring area, the obd port from a wreck and wire it in to the pcm loom. You'll need power, 2x ground and aldl pins, then an aldl interface to read data. Keep in mind that its not obd2.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396