Prolific based USB->Serial 8192 baud support

Information and discussion of EFI hardware and specifications
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Prolific based USB->Serial 8192 baud support

Post by Holden202T »

i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!
malser
Posts: 15
Joined: Thu Apr 29, 2010 10:48 pm
Location: Ukraine, Vinnitsa

Re: Prolific based USB->Serial 8192 baud support

Post by malser »

What is this device? Remove the physical devices, remove all drivers. Make sure that they are deleted (insert the device. The system should indicate that "unknown device found"). Again, physically remove the device and try to install the driver. The device must necessarily be defined as Prolific USB-to-Serial Comm Port.
Holden202 wrote:i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!
ftdi interface - is very good, but the topic for discussion Prolific
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Prolific based USB->Serial 8192 baud support

Post by Holden202T »

malser wrote:ftdi interface - is very good, but the topic for discussion Prolific
that was my way of saying i am over the prolific :P
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Prolific based USB->Serial 8192 baud support

Post by Holden202T »

well i got given an old spare usb -> serial adaptor, plugged it in and it detected at prolific and all the info here works for getting logging and tuning happening, so i'd say i should drop kick my old device!
Piter666
Posts: 1
Joined: Tue Mar 12, 2019 12:25 am
cars: Ford

Re: Prolific based USB->Serial 8192 baud support

Post by Piter666 »

Try instead of SerialMonitor this (https://www.virtual-serial-port.org/pro ... almonitor/) tool will be more convenient. In such systems, the message is usually duplicated. Monitoring from the side of the console would greatly facilitate the task.
User avatar
j_ds_au
Posts: 384
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Prolific based USB->Serial 8192 baud support

Post by j_ds_au »

Why tell us about this software that doesn't even support 8192 baud?

Joe.
Post Reply