Found these the other night while googling.
https://www.mrs-electronics.com/products/microplex
https://www.littelfuse.com/~/media/comm ... x-7xhl.pdf
Might be right up the alley of some of you clever code monkeys on here
https://www.microplexlab.com/
My purpose for looking at this stuff is mainly being able to trigger outputs based on can data, for instance for turning on reverse lights. park/neutral safety when doing conversions where the gearbox only transmits info over can aka 6l80e.
Turn on 2nd fuel pumps etc based on boost/rpm/throttle or multiple conditions... shitttee..... skys the limit.
CAN Relays
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: CAN Relays
they look pretty cool
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Tre-Cool
- Posts: 290
- Joined: Tue Oct 16, 2012 12:17 pm
- cars: VY SS UTE, VX Drag Car
- Location: Perth
- Contact:
Re: CAN Relays
yeah going to try get a couple of units & programming kit, but in the current environment it could be a long time before delivery.
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
Re: CAN Relays
Very very interesting.Tre-Cool wrote:Found these the other night while googling.
https://www.mrs-electronics.com/products/microplex
https://www.littelfuse.com/~/media/comm ... x-7xhl.pdf
Might be right up the alley of some of you clever code monkeys on here
https://www.microplexlab.com/
My purpose for looking at this stuff is mainly being able to trigger outputs based on can data, for instance for turning on reverse lights. park/neutral safety when doing conversions where the gearbox only transmits info over can aka 6l80e.
Turn on 2nd fuel pumps etc based on boost/rpm/throttle or multiple conditions... shitttee..... skys the limit.