crazy question ...

andoro2me · Post by **andoro2me** » Tue Oct 05, 2010 2:56 am

It would be possible to run simultaneously ( in parallel ) 2 ecm ?

Post by **yoda69** » Tue Oct 05, 2010 5:56 am

I have heard of somebody running 2 808's on a V12 jag, one for each bank of 6 cyl.

yoda69

Six_Shooter · Post by **Six_Shooter** » Tue Oct 05, 2010 11:14 am

I'm not sure why you'd want to do that.

Post by **delcowizzid** » Tue Oct 05, 2010 11:53 am

yes it is possible but only needed for more than 8 cylinders hence why the jag ran 2 one for each bank of the v12

Post by **The1** » Tue Oct 05, 2010 2:48 pm

so i could use 4 ecu's then on the 797B V24?

UCMatt · Post by **UCMatt** » Tue Oct 05, 2010 8:27 pm

Cool,
Will only need 2 X 808's for my W16 Veyron conversion.................

andoro2me · Post by **andoro2me** » Wed Oct 06, 2010 1:42 am

I'm intersted in a dual ecm system , for running lpg injection on a stock ecm ...

Dec_head · Post by **Dec_head** » Wed Oct 06, 2010 7:41 am

Why can't you just stack two bins on the eprom and switch between them for lpg and petrol ?

Post by **charlay86** » Wed Oct 06, 2010 10:12 am

Dec_head wrote:Why can't you just stack two bins on the eprom and switch between them for lpg and petrol ?

and then you could hook up both sets of injectors in parallel to the ecm and then switch over the 12v feed from the petrol injectors to the lpg ones

darcy · Post by **darcy** » Wed Oct 06, 2010 10:17 am

Dec_head wrote:Why can't you just stack two bins on the eprom and switch between them for lpg and petrol ?

Looking at andoro2me's other posts he has a Vectra with a Flash based ECM