VS Wiper Motor Switch Install

Wiring diagrams and questions
Post Reply
User avatar
Rhysk94
Posts: 39
Joined: Sun Mar 15, 2020 7:25 pm
cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo
Location: Perth
Contact:

VS Wiper Motor Switch Install

Post by Rhysk94 »

Hey guys,
Have a mate who wanta to delete his wiper stalk in his drift car and just install a switch or 2 for wipers. All that is wanted is a slow speed and fast speed. Not stressed about intermittent and washer.
I know how to wire this direct to the motors themselves using 2 5 pin relays and a couple diodes but I'm having trouble finding pinout's for the wiper switch and wiring diagrams to see how from factory things are done, such as the park position and lifting it. As he is wanting to just wire it straight from the connector the original stalk plugged into.

Does anyone have either information on those or have diagrams?

Cheers
Charlescrown
Posts: 1829
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: VS Wiper Motor Switch Install

Post by Charlescrown »

Only have VR but it should be the same.
Attachments
VR wiper washer.pdf
(979.48 KiB) Downloaded 66 times
VK_3800
Posts: 523
Joined: Sun Jul 04, 2010 3:15 pm
cars: SS Torana
Location: NZ

Re: VS Wiper Motor Switch Install

Post by VK_3800 »

Park should be handled at the motor end, it keeps the power running with a mechanical switch system until the wipers return. Makes the switch end fairly simple.
Post Reply