VS V6 & V8 PCM Wiring Diagram
Re: VS V8 Auto Wiring Diagram
VS V8 MANUAL SERIES 1&2
VS V8 Auto Series 3
VS V6
Re: VS V8 Wiring Diagram
hey sorry guys, my VS S2 and my VS BT1 looms dont have a knock sensor on them, what could be the difference there?
-
- Posts: 3427
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: VS V8 Wiring Diagram
Only HSV used the knock sensor/have the wiring in the loom.
Re: VS V8 Wiring Diagram
It's actually a seperate run wire on these model's. Not a part of the engine harness.
Re: VS V8 Wiring Diagram
so would it matter at all if i wired a VT roller cam into VS ute with standard VS V8 loom without knock sensor?
Re: VS V8 Wiring Diagram
No so long as the knock sensor is disabled in the tune.
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: VS V8 PCM Wiring Diagram
I fitted a vt roller engine into my brother vq. Just run all your accessories and intake manifold along with you engine loom on the vt motor and your done.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS V8 PCM Wiring Diagram
why do you need to run the earlier inlet manifold ? I would have thought they were the same ?
No matter what the question is, the answer is always more horsepower! ![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VS V8 PCM Wiring Diagram
No IAT sensor thread and only 1 temp sensor thread at the Front. Probably missing the vac port for MAP to can't remember that one.