DFI wiring plugs ?

[briney]

hi guys. i have a 1927a 4 cyl dfi module i bought. i was able to get the 3 and 6 pin plugs ok. the 2 pin power/earth plug with the 1 large spade and 1 small terminal is eluding me. holden don't do it. i tried some places on the web and in australia. wreckers won't cut one off a loom. aside from finding one in a p'n'p wreckers and slipping it into my pocket, does anyone have a source for them ? the connector i mean can be seen here,

https://pcmhacking.net/forums/view ... 923#p11923

it's the 2 pin connector on the end of the module in the 2nd photo from the top.

[Holden202T]

i normally get stuff from these guys if i can't find it on other looms etc

http://www.eficonnection.com/eficonnection/default.aspx

[briney]

i found them in one of your other threads. they seem to have everything but !

[Jayme]

my 6 pin plugs are ordered and on the way, but for the 2 pin, fat is power, skiny is earth, which is earthed thru the module base anyway. im just ognna put a fat spade lug on it and cover in silicone lol.

[briney]

that was my next thought, try and make something. if the little pin doesn't matter that saves much fucking around. thanks.

[Jayme]

well, i havent said that from experience yet give me a few weeks and ill have tried it. multimeter links that pin directly to the module base and so does the diagram ive got so im pretty sure itll work with just the power pin hooked up.

[antus]

Ive got a couple of these modules on the way and will be looking in to this too in the near future. Will post back if I find anything.

[yoda69]

Try these guys.
http://www.bmotorsports.com/shop/index. ... 09_130_134

They seem to have nearly everything, although postage can be a little steep for one part.

yoda69

[Holden202T]

top link yoda!

[Apples]

Hi Guys,
would this be what you are looking for ?

http://www.acdelcotechconnect.com/pi/wi ... 306325.jpg



if GM used or make it you can find it here most of the time.

http://www.acdelcotechconnect.com/pi/wi ... /pigtails/