Does anyone have a JE Camira Wiring Diagram ?

Wiring diagrams and questions
Rock_Lobster
Posts: 44
Joined: Sat Jun 06, 2009 8:56 pm
cars: EH Ute with soon to be VK EFI
Location: Latrobe Valley, Vic.

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by Rock_Lobster »

I had better go and take some then...

Wayne
If you can't be a good example, be a horrible warning.
VNracer34G
Posts: 345
Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by VNracer34G »

Rock_Lobster wrote: Whats it all for ?

I have an EH ute I am doing up. 186 red motor. I also have a VK EFI head, manifold and anciliaries. I think you can guess where I am going with all this :D .

Sound familiar ?

Wayne
Very! you will need to use the Blue/Black head gasket. The coolant passages are different on the manifold side, use the 12port head gasket as a template on the block to drill passages in the red block to match. The original passages in the red block need blanking off as there is no meat on the 12port face to seal them off with the gasket.....i just used brass pipe plugs on mine. As a side note if you are going to play with cams i reccommend machining the inlet spring seats down .100" to match the exhaust (pleny of meat before water, i drilled right through a stuffed one to check) give the rotators the backhand salute in favour of a proper retainer and then you can use any spring for a 308 or SBC with a 1.7' installed height
Build it, Race it, Break/Bend it ; Repeat.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by Holden202T »

yeah i have to agree with the head mods, especially the rotators....

more info on the head conversion is here http://www.oldholdens.com/tech/vkeficon ... x.php#head
VNracer34G
Posts: 345
Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by VNracer34G »

Definitely the starfire rods from the blue motor but chuck the stock bolts for ARP ones 11/32" sbc ones do the trick and are reasonably priced due to the volume produced for the chev guys. Dont mix up pushrods the 3.3 ones arent surface hardened and guideplates eat them real fast if you go the early adjustable rocker route. Personally i'd stick with the 186, few less cubes-bit less torque but you can rev the living crap out of them way beyond where the 202 3.3 will let go a piston and they sound mean screaming at 7000rpm :punk:
Build it, Race it, Break/Bend it ; Repeat.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by Holden202T »

7000rpm is fine from a 202, i've had first hand experience :D not very practial for a street car though ....
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by antus »

From the first link in this thread, but just incase the diy-ftp server goes off line heres a local copy.
Attachments
je.zip
(366.01 KiB) Downloaded 778 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by Holden202T »

and heres a backup :D
http://www.oldholdens.com/temp/carstuff ... %20Camira/
theres a fair bit more in mine ... i've been collecting everything i can find on the JE Camira stuff :punk:
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Does anyone have a JE Camira Wiring Diagram ?

Post by antus »

ecu wiring
Attachments
page142 ecu wiring.jpg
page142 ecu wiring.jpg (409.81 KiB) Viewed 8618 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply