147 LUX BCM Wiring Loom

Wiring diagrams and questions
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 147 LUX BCM Wiring Loom

Post by Holden202T »

dannyboyds wrote:What was I supposed to open that file with Holden202? it doesn't have a file name extension?
pretty sure it was a zip file from memory.
dannyboyds
Posts: 15
Joined: Tue Aug 18, 2009 4:58 pm
cars: VS Commodore

Re: 147 LUX BCM Wiring Loom

Post by dannyboyds »

Ahh sorry I meant the file inside the ZIP.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 147 LUX BCM Wiring Loom

Post by Holden202T »

there should be a heap of files and one of them should be setup.exe
dannyboyds
Posts: 15
Joined: Tue Aug 18, 2009 4:58 pm
cars: VS Commodore

Re: 147 LUX BCM Wiring Loom

Post by dannyboyds »

ahhh, I got it, you sent me a file called vrvs inside a zip file, its a zip in a zip.

Thanks mate.

Found a loom today, one of the local wreckers rotated thier stock and a few new cars came into public access, one of them has a 147 LUX with airbags etc, etc it was even built the same year as my car.

So I might get out of this even easier, murphys law though, I think my loom is nearly done, A mate of mine has been picking away at it, using chunks of other random commodore looms.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 147 LUX BCM Wiring Loom

Post by Holden202T »

lol, dunno how i managed to zip it twice!
dannyboyds
Posts: 15
Joined: Tue Aug 18, 2009 4:58 pm
cars: VS Commodore

Re: 147 LUX BCM Wiring Loom

Post by dannyboyds »

ok so the new loom is in the car :D I was able to find the correct loom 100% intact at a wreckers so I used that.

Everything is going except the ehadlights still? I suspect the BCM but I pulled it appart and didn't spot any burnt out tracks, I have allready tried different relays but who knows, maybe i'll just wreck the car.

Dr Bob, I would like to apologise for not believing you earlier about the 885 closer inspection shows it is 100% compatible, unless the car has airbags, it then requires the extra module, and the airbag side of the loom is not present in an 885 car without the extra module for some reason, damn holden they do everything the hard way.
dannyboyds
Posts: 15
Joined: Tue Aug 18, 2009 4:58 pm
cars: VS Commodore

Re: 147 LUX BCM Wiring Loom

Post by dannyboyds »

AHA! Confirmed, the BCM is to blame for the headlights not working, need to get a new keyhead done and it might be driveable.

Just a few gremlins to work out now. Thanks for the help guys.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 147 LUX BCM Wiring Loom

Post by delcowizzid »

nice nearly there :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
dannyboyds
Posts: 15
Joined: Tue Aug 18, 2009 4:58 pm
cars: VS Commodore

Re: 147 LUX BCM Wiring Loom

Post by dannyboyds »

Hey Delco, yeah nearly.

It should be driveable tomorrow night, but i'm not too keen on driving it if it's still got wiring gremlins, like the cluster wont display how many kilometers it has done untill the headlights are switched n, it does this one either BCM I use, also flashes the fuel light and a few others the cluster lights up with nothing on it and the fan blows full ball when the car is sitting on ACC, its got me stumped.

I should have let it burn.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 147 LUX BCM Wiring Loom

Post by Holden202T »

dannyboyds wrote:I should have let it burn.
LOL
Post Reply