Replace Flash PCM With VX/VY S/C PCM
Re: Replace Flash PCM With VX/VY S/C PCM
Does anyone know where these plugs can be purchased? And what there called? Also the 1 do you sell these ?
Thanks
Thanks
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Replace Flash PCM With VX/VY S/C PCM
On the supply part of the question: unfortunately you need to cut the end of the loom out of a VT, and destroy a flash pcm and desolder & re-use the connector from there.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Replace Flash PCM With VX/VY S/C PCM
i dont offer it as it's very time consuming, but if you paid enough i would lolz, the other option is to repin your existing loom onto VT plugs, same time consuming job but cheaper. This is the option though as some people dont want to mod there existing loom.
Re: Replace Flash PCM With VX/VY S/C PCM
So would this adapter harness let me run a NA VT V6 auto pcm in a NA V6 auto VX?
Thanks,
vc81
Thanks,
vc81
Re: Replace Flash PCM With VX/VY S/C PCM
Cheers thanks yoda69
Re: Replace Flash PCM With VX/VY S/C PCM
i actually have the loom in the OP picture here i will prob never use, also the PCM with it, so if someone makes a reasonable offer they can buy it.
Re: Replace Flash PCM With VX/VY S/C PCM
Would that let me use a vt s/c computer in a vy v6 na? What do you consider a reasonable offer for the loom? Whats your time worth? 150.. anywhere close?
Re: Replace Flash PCM With VX/VY S/C PCM
ive been charging $250 for the labour, it's 3-4 hours work. Im happy to sell that one i have for $250 complete with VT PCM & Memcal plus post, it's all fine just not as tidy as i do them now and slightly shorter, still works 100%
Re: Replace Flash PCM With VX/VY S/C PCM
How much are the ones you do now?