ECU Plug Colour

[v6bucket]

Sorry if this has already been asked, are the VR ECU plugs blue in colour? if so what pins do I alter to suit an 808 ecu.
thanks Waz

[Dylan]

http://pcmhacking.net/forums/viewtopic.php?f=32&t=337

http://pcmhacking.net/forums/viewtopic.php?f=32&t=1352 V8 manual down the bottom. Same wiring as the 808

The 12P and 11P download has the pin outs included. Almost every wire needs to be moved to suit a 808 but it has been done many times.

[Holden202T]

I went the other way converted a VN V8 loom to VR Auto ..... your right pretty much every pin is in a different spot

but if its a VR manual then no change for 808.

[Charlescrown]

Except the data output

[v6bucket]

Thanks for the replies, but is the colour of the VR ecu plugs blue? The loom has been partly disconnected with side cutters.

[VL400]

Normally the VR auto plugs are blue in colour, they are also keyed differently to the 808 so wont physically plug in (this can be fixed by cutting a small bit off the plug though).

Cross reference the VR auto diagram linked by Dylan to what you have and see if it matches up.

[antus]

This is a daewoo pcm, and the pcm looks more like an '808 than a '424 but the loom plug and physical details are the same as the VR '424. so you can get an idea of the plugs here: http://pcmhacking.net/forums/viewtopic. ... 79&p=43760

[v6bucket]

Thanks for the replies, the plugs look the same as the ones in the link that Antus put up. I will check wiring over the next few days & see if I can utilize the loom.