Converting MAF to MAP v8

Wiring diagrams and questions
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: Converting MAF to MAP v8

Post by hsv08 »

yoda69 wrote:In regards to injector wring you also need to look at firing order, here is a post from another thread that hopefully makes sense.
Look at the grouping, v6 is in groups of 3 and 3 as per firing ordering.
2,3 & 4 and 1,5 & 6 which is 3 firing cylinders followed by the next 3.
Given that firing order only by convention starts at 1, if you off set the v8 by 1 to 27845631 you get 2 groups of 4 grouped as per the wiring 2478 and 1356. Batch fire may have been a consideration for the v8 but never implemented, but more than likely was copied from some chev wiring.
yoda69
Thanks for clearing that up. Makes sense.
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Converting MAF to MAP v8

Post by Jayme »

http://pcmhacking.net/forums/viewtopic.php?f=32&t=421

ah this is not the first time this has been asked!! older thread linked for reference.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Converting MAF to MAP v8

Post by Holden202T »

wouldn't it be easier to get a VR V8 loom and just plug it in ? then just splice in the stuff like VT dizzy that's different ?

then again I re-pinned a VN V8 loom to VR V8 :)
Post Reply