Vy cluster bench wiring

Wiring diagrams and questions
User avatar
Posts: 321
Joined: Thu May 09, 2013 6:50 pm

Re: Vy cluster bench wiring

Postby hsv08 » Thu Aug 04, 2016 5:58 pm

Dylan wrote:Maybe you need to ground an input for some door switches? Such as bonnet or boot or door switches. The cluster will alert you when the alarm has been previously activated and even which door or boot was opened. Something to check off anyway.

here is a video of it starting up with BCM connected,
looking through the BCM PDF i have all the doors switches are earthed when open, so being open circuit they wont be pulling low so BCM should think the doors are shut.
It could be that when the BCM and cluster power up it goes straight to ON (both ON and Ignition and BCM main power are triggered together.
The cluster did come up as "hotwired" on a few startups haha.

Please excuse my wife in the background,
Apparently i lead her to drink....

https://youtu.be/HxF-Rhoo08Q

Posts: 3143
Joined: Mon Aug 02, 2010 6:35 pm

Re: Vy cluster bench wiring

Postby Dylan » Thu Aug 04, 2016 6:16 pm

There very well could be more to this. But you say pulled low. If you have those inputs shorted to ground that's same as door open.

User avatar
Posts: 1806
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: Vy cluster bench wiring

Postby Tazzi » Thu Aug 04, 2016 7:30 pm

Dylan wrote:There very well could be more to this. But you say pulled low. If you have those inputs shorted to ground that's same as door open.

Thats what I thought also?
Image

Posts: 24
Joined: Sun Dec 13, 2009 8:07 pm

Re: Vy cluster bench wiring

Postby evilstuie » Thu Dec 27, 2018 10:06 pm

Old thread but thought it was fitting, does the trip computer work off the PCM data or through the BCM?

My trip computer on my VY dash with LS1 PCM doesn't show any fuel consumption or instant fuel usage data.
I'm wondering if its a fuse, a wire not grounded/wired in properly, or a PCM flash setting I need to set up.

Previous

Return to Wiring

Who is online

Users browsing this forum: No registered users and 3 guests