VZ 3.6 V6 ECU Pinout Bosch E55

Wiring diagrams and questions
Posts: 4
Joined: Fri Apr 11, 2014 9:26 am

VZ 3.6 V6 ECU Pinout Bosch E55

Postby DHW » Thu Oct 06, 2016 7:13 am

Hi Guys

Anyone have a pinout for this ECU?
Struggling to find anything.
Need powers, grounds and communication pins.

Cheers

User avatar
Posts: 9569
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby Holden202T » Thu Oct 06, 2016 8:14 am

I'm not sure if all of them were E55 or not ? but I have this....

ECM Connector Pinouts.pdf
(574.5 KiB) Downloaded 663 times

Posts: 4
Joined: Fri Apr 11, 2014 9:26 am

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby DHW » Thu Oct 06, 2016 2:42 pm

Oooh, thats gold. Thanks a bundle! I'll have a peak see if it matches.

Anyone bench harnessed one for reflashing?

Site Admin
User avatar
Posts: 5522
Joined: Sat Feb 28, 2009 8:34 pm

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby antus » Thu Oct 06, 2016 3:08 pm

Made post a sticky.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 9569
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby Holden202T » Thu Oct 06, 2016 3:11 pm

DHW wrote:Oooh, thats gold. Thanks a bundle! I'll have a peak see if it matches.

Anyone bench harnessed one for reflashing?

no I've only ever re-flashed in the car.

User avatar
Posts: 2571
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby Jayme » Sun Oct 09, 2016 9:11 pm

ya I made up a bench harness while ago.... worked fine. from memory, I just followed holdens pinouts and connected power, ground and CAN wires.

User avatar
Posts: 1801
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: VZ 3.6 V6 ECU Pinout Bosch E55

Postby Tazzi » Mon Oct 10, 2016 10:18 am

Jayme wrote:ya I made up a bench harness while ago.... worked fine. from memory, I just followed holdens pinouts and connected power, ground and CAN wires.

May need to throw in another terminating resistor into the harness to make the comms line meet standards, otherwise works straight out of the box following the diagram.

Return to Wiring

Who is online

Users browsing this forum: No registered users and 5 guests