Complete pinout for VR OBD?

Wiring diagrams and questions
Post Reply
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Complete pinout for VR OBD?

Post by vlad01 »

Anyone have a complete pinout as per title?

I can only find one that states half the pins but not all of them. I have all the VR wiring diagrams but they still only show 3 or 4 of the wires out of the 7 there.

I need it so I can forward the VN/VP ALDL connections to the OBD style plug so I can not only data logging but all connections available.

So far I only have data, diag mode enable, GND and switched 12v +. There are a whole bunch more I have no info for and differ from the VN/VP colour codes except one.

Thanks in advance :thumbup:
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Complete pinout for VR OBD?

Post by The1 »

like this?
Attachments
aldl.jpg
aldl.jpg (16.6 KiB) Viewed 2888 times
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Complete pinout for VR OBD?

Post by vlad01 »

Thanks. Ok that's good then, absolutely none of the others I was wanting to know are relevant.

I only need the ones I already got 5, 6, 9 and 16.

The ALDL on the VN/VP has fuel pump, TCC and CEL output
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply