High/low speed fan control

Wiring diagrams and questions
Post Reply
IMA355-2
Posts: 41
Joined: Sat Jun 18, 2016 3:32 pm
cars: VR SS T56 6 Speed 3.9 diff

High/low speed fan control

Post by IMA355-2 »

Hey Guys
Just a quick question
Am I right in saying that pin a8 on a vr v8 auto ecu is the high speed fan control and a6 is the low speed?
Are those outputs switching 12 v or earth ( I believe earth but wanted to double check)
Included a wiring diagram for how I intend to wire the fans in if someone could cast their eye over it.

Cheers legends :thumbup:
Attachments
2C3AF795-CCB3-48BF-BA27-73F3E76B280B.jpeg
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: High/low speed fan control

Post by Holden202T »

im not sure why your trying to do it with 3 relays ?

i would just run a separate relay for each fan.
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: High/low speed fan control

Post by immortality »

I think it's that's how some of the Ford dual fans come from the factory?
IMA355-2
Posts: 41
Joined: Sat Jun 18, 2016 3:32 pm
cars: VR SS T56 6 Speed 3.9 diff

Re: High/low speed fan control

Post by IMA355-2 »

Holden202t

That definately crossed my mind but they are very noisy at full speed, other option is to turn them on with the low speed control and use another temp sender for high speed control. Then they won’t automatically come on high speed with the ac fan.
I have the engine harness out of the car anyway so adding the wire in for the low speed is no worries :thumbup:
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: High/low speed fan control

Post by Holden202T »

what are you saying you want them both come on at low speed then go faster when the high speed setting applies ?
IMA355-2
Posts: 41
Joined: Sat Jun 18, 2016 3:32 pm
cars: VR SS T56 6 Speed 3.9 diff

Re: High/low speed fan control

Post by IMA355-2 »

Yeah I’ve had them in the car for ages using a couple of relays to turn on on or both but even 1 on by itself is so noisy coz it’s at full speed. I know how they are wired on fords but the Delco uses ground switching so just wanted to check that it will work whe way I’ve drawn it :thumbup:
Post Reply