Are all 0411 pcm pinouts the same?

Wiring diagrams and questions
Post Reply
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Are all 0411 pcm pinouts the same?

Post by 12ramhemi »

Is there a difference in pcm pinout for the 0411 pcm from different models and years? I have 2 0411 from 2002 s10 4.3 and one from an 01 express van 5.7. I'm wanting to flash one of them to a 02 camaro 5.7 OS.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Are all 0411 pcm pinouts the same?

Post by antus »

The hardware has the same capabilities, but there are some differences between sensors and outputs on some different operating systems. If you do a full read on the PCM in your car, then you do the os + calibration in to your spare P01 it'll suit the car the software is for. Different operating systems for different years of the same car will also be the same. Different OS on different car you'd want to compare the pinouts.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: Are all 0411 pcm pinouts the same?

Post by 12ramhemi »

antus wrote:The hardware has the same capabilities, but there are some differences between sensors and outputs on some different operating systems. If you do a full read on the PCM in your car, then you do the os + calibration in to your spare P01 it'll suit the car the software is for. Different operating systems for different years of the same car will also be the same. Different OS on different car you'd want to compare the pinouts.

So as long as I flash one of the 0411 pcms to the 02 camaro 5.7 os /cal and pin my harness to that same year as the os, then it will work fine? Thank you for your quick reply.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Are all 0411 pcm pinouts the same?

Post by antus »

It might be the same anyway, they are reasonably constant. Check the pinouts of the two cars to know your options. But if you don't have or cant be bothered checking, running the same OS as stock guarantees it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply