vs commodore engine loom to engine bay connectors
vs commodore engine loom to engine bay connectors
does anyone know what brand,model and where to buy the 8 pin grey and 6 pin black connectors or pins for vs commodore engine loom to engine bay connectors.
Re: vs commodore engine loom to engine bay connectors
I believe that this is the 8 pin connector. They are listed as being for a Nissan
https://www.efihardware.com/products/22 ... emale-Grey
https://www.efihardware.com/products/22 ... emale-Grey
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: vs commodore engine loom to engine bay connectors
Yes that's right. The 8 pin is a Nissan one, left overs from the VL era. The 6 pin is just a standard automotive one, same as the narva ones at most auto shops though I tend to reuse the housing and get new terminals from RS components if you can be bothered searching for them.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: vs commodore engine loom to engine bay connectors
FWIW, the most common brand of connectors used in Commodores seems to have been (AFAICT) Yazaki, then AMP/Tyco as a distant second, then a sprinkling of others such as Sumitomo, Delphi/Aptiv, etc.
Joe.
Joe.