BFPL

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
User avatar
Posts: 342
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

BFPL

Postby jenko » Tue Oct 24, 2017 3:27 pm

I bought a 424 ecu from ebay and it has a BFPL memcal in it that does not apear to be tampered with (black base knock filter board and sticker still on eprom)so I read the bin and used the id tool and it is not recognised then compared it to the bfpl bin in the id tool data and it is totaly different
can some one shed some light on what the bin actually is
Attachments
bfpl from 424.bin
(64 KiB) Downloaded 2 times

User avatar
Posts: 4147
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: BFPL

Postby delcowizzid » Tue Oct 24, 2017 3:45 pm

bad read by the looks of it 1 or more pins not connecting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 342
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

Re: BFPL

Postby jenko » Tue Oct 24, 2017 4:48 pm

read it again and all good How did you know it was a bad read?

User avatar
Posts: 4147
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: BFPL

Postby delcowizzid » Tue Oct 24, 2017 5:06 pm

Recuring strange data over and over again when viewed in hex editor
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 342
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

Re: BFPL

Postby jenko » Tue Oct 24, 2017 5:50 pm

thanks

Return to Chip/Memcal Reading/Writing

Who is online

Users browsing this forum: No registered users and 1 guest