I bought a 424 ecu from ebay and it has a BFPL memcal in it that does not apear to be tampered with (black base knock filter board and sticker still on eprom)so I read the bin and used the id tool and it is not recognised then compared it to the bfpl bin in the id tool data and it is totaly different
can some one shed some light on what the bin actually is
BFPL
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
BFPL
- Attachments
-
- bfpl from 424.bin
- (64 KiB) Downloaded 319 times
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: BFPL
bad read by the looks of it 1 or more pins not connecting
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: BFPL
Recuring strange data over and over again when viewed in hex editor
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem