4 Cyl Memcal
4 Cyl Memcal
This has probably been asked before, can the memcals in the V6 be used in N13 Pulsars if the knock board is removed & the bin changed? I'm helping with a Pulsar & have plenty of V6 memcals, 1 V8 memcal & the memcal fitted in the Pulsar. I'm looking at using $12P.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Re: 4 Cyl Memcal
can do, but you need to change the cylinder select on the netres as seen in this post - https://pcmhacking.net/forums/viewtopi ... t=10#p6850
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 4 Cyl Memcal
to go 12p you'll also need a 256kbit eprom (stock is 128kbit)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: 4 Cyl Memcal
...and a high speed comms mod if you're going to use 12p.
Re: 4 Cyl Memcal
Thanks for the replies.
I have an NVRam setup & high speed comms already. Might play with it after Xmas.
I have an NVRam setup & high speed comms already. Might play with it after Xmas.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---