4 Cyl Memcal

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
v6bucket
Posts: 761
Joined: Tue Jul 21, 2009 10:02 am

4 Cyl Memcal

Post by v6bucket »

This has probably been asked before, can the memcals in the V6 be used in N13 Pulsars if the knock board is removed & the bin changed? I'm helping with a Pulsar & have plenty of V6 memcals, 1 V8 memcal & the memcal fitted in the Pulsar. I'm looking at using $12P.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Top
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: 4 Cyl Memcal

Post by Jayme »

can do, but you need to change the cylinder select on the netres as seen in this post - https://pcmhacking.net/forums/viewtopi ... t=10#p6850
Top
User avatar
antus
Site Admin
Posts: 8251
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:
Contact antus

Re: 4 Cyl Memcal

Post by antus »

to go 12p you'll also need a 256kbit eprom (stock is 128kbit)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
User avatar
festy
Posts: 1039
Joined: Sat Apr 30, 2011 6:27 pm
cars: Alfa Romeos
Location: Narellan, NSW

Re: 4 Cyl Memcal

Post by festy »

...and a high speed comms mod if you're going to use 12p.
Top
v6bucket
Posts: 761
Joined: Tue Jul 21, 2009 10:02 am

Re: 4 Cyl Memcal

Post by v6bucket »

Thanks for the replies.
I have an NVRam setup & high speed comms already. Might play with it after Xmas.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Top
Post Reply

Return to “Chip/Memcal Reading/Writing”