Hi Guys,
I'm trying to write a VS Supercharged bin but not having much luck, Ive tried different memory offsets but cant get it to work. The chip is an AM29F040B-90PC and I'm using a burn 1. Not sure if I have to stack the bin file first but don't know to do this. Ive attached the bin if someone can take a look.
Thanks,
Steve.
Writing VS bin to AM29F040B
Writing VS bin to AM29F040B
- Attachments
-
- vs.BIN
- (128 KiB) Downloaded 282 times
Re: Writing VS bin to AM29F040B
Yes, you will need to stack it (or force it to use a particular area of memory).
It is a 4Mbit (512k Bytes) chip and your VS bin is 1Mbit (128k Bytes), so you will need to stack it 4 times.
you can do this in tunerpro under tools -> Bin stacker / splitter.
mode: stack bin size: 128kB chip size: 512kB block size: 128kB
in the bottom section of the dialog select you bin file in each of the four rows (click browse..)
click stack, save the file and your ready to burn!
It is a 4Mbit (512k Bytes) chip and your VS bin is 1Mbit (128k Bytes), so you will need to stack it 4 times.
you can do this in tunerpro under tools -> Bin stacker / splitter.
mode: stack bin size: 128kB chip size: 512kB block size: 128kB
in the bottom section of the dialog select you bin file in each of the four rows (click browse..)
click stack, save the file and your ready to burn!
Re: Writing VS bin to AM29F040B
Thanks mate, that makes sense now, i was putting 1mb in chip size and was scratching my head. I'll burn it now and try later tonight.
Re: Writing VS bin to AM29F040B
Worked like a treat, Thanks again