Writing VS bin to AM29F040B

[GM Tech]

Hi Guys,

I'm trying to write a VS Supercharged bin but not having much luck, Ive tried different memory offsets but cant get it to work. The chip is an AM29F040B-90PC and I'm using a burn 1. Not sure if I have to stack the bin file first but don't know to do this. Ive attached the bin if someone can take a look.


Thanks,

Steve.

[charlay86]

Yes, you will need to stack it (or force it to use a particular area of memory).
It is a 4Mbit (512k Bytes) chip and your VS bin is 1Mbit (128k Bytes), so you will need to stack it 4 times.
you can do this in tunerpro under tools -> Bin stacker / splitter.
mode: stack bin size: 128kB chip size: 512kB block size: 128kB
in the bottom section of the dialog select you bin file in each of the four rows (click browse..)
click stack, save the file and your ready to burn!

[GM Tech]

Thanks mate, that makes sense now, i was putting 1mb in chip size and was scratching my head. I'll burn it now and try later tonight.

[GM Tech]

Worked like a treat, Thanks again