Hi all ,
Im wondering if anyone knows where you can get a 27SF512 or similar chip from an australian source?
Thanks
Australian available chip?
Re: Australian available chip?
You might try wes components or wagner electronic components i usually just buy them from ebay.
Re: Australian available chip?
Thanks for the reply mate
I tracked down a chip finally lol
One more question though, obviously i will be removing the eprom quiet frequently to tune so what would everyone recommend:
an adaptor pin board that will adapt from the memcal header to fit the programmer or just solder on a IC socket to the memcal and then remove the eeprom and program it that way?
Thanks
I tracked down a chip finally lol
One more question though, obviously i will be removing the eprom quiet frequently to tune so what would everyone recommend:
an adaptor pin board that will adapt from the memcal header to fit the programmer or just solder on a IC socket to the memcal and then remove the eeprom and program it that way?
Thanks
Re: Australian available chip?
I would do both. Socket the memcal as this will make changing the chip easier later if it fails. Using the memcal adapter is much easier for writing than wedging the chip out of the socket each time to program
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Australian available chip?
i agree
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Australian available chip?
awsome thanks fellas
adaptor it is then
adaptor it is then