Is knock sensor white bit removable?
- Circlotron
- Posts: 235
- Joined: Mon Apr 25, 2011 4:12 pm
- cars: VP 5L LPG
Is knock sensor white bit removable?
Looking about on ebay for a spare memcal and a lot of them are from V6s and they have the white ceramic thick film hybrid knock sensor circuitry. Have not had a close look at one, so, will this piece come out easily so I can convert it to a V8 one? Must change the resistor packs too, I know.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Is knock sensor white bit removable?
You can leave the knock filter on there, the v8 non-hsv has knock control disabled. And can convert the v6 to v8 .. https://pcmhacking.net/forums/viewtopi ... lit=netres
Limp home mode will be poor but its unlikely to ever need it, and can just leave your original memcal in the car as a spare.
Limp home mode will be poor but its unlikely to ever need it, and can just leave your original memcal in the car as a spare.