Vp nvram offsets and ect
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Vp nvram offsets and ect
Having problem with a tune on a vp turbo 6, its running in limp mode and not of the nvram. Iv tried offsetting at x8000 but it fails the verification in the william. Iv tried the standard bin thats stacked? At no offset and still no good. Any help would be great. I cant give any logs as the usb is not working
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Vp nvram offsets and ect
For 12P offset 8000 is bank 1 and 18000 is bank 2, as you found in the 12P zip file there are stacked bins - just burn that with 0 offset and it sets up both banks for you If it fails to verify that then DS1245Y sounds like its faulty. To also confirm though, you do need to be removing the DS1245 from the nvram board to program it. USB comms wont work until the NVRAM works, you wont get data in limp mode (the red LED on the USB board will be on solid all the time too).
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vp nvram offsets and ect
Im using the 12p turbo base tune. Could explain why the usb doesnt work. When i burn it at 8000 and try read it in tunerpro and all i get is 25 in the values. Comes up fine at 0000 though.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vp nvram offsets and ect
I've just found and taken a look at that tune. There is no program code in the base tune, only the calibration. Then to make matters worse its a $12P v1.0.4 calibration so you'll need to update it to v1.1.1 with the flashtool first. Then you'll need to get the ecu booting up on a stock shipped tune, then upload the v1.1.1 cal only with VL400's flash tool over USB. The fact the zip file is only 2kb raised my suspicions and looking at the contents with a hex editor confirmed.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vp nvram offsets and ect
Lol so iv been pushing sh!t uphill with a wet cloth. Ill just do my own tune lol
What offset do i use on a 27sf512 chip? Just incase the dsy is corrupt. Cheers heaps guys
What offset do i use on a 27sf512 chip? Just incase the dsy is corrupt. Cheers heaps guys
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Vp nvram offsets and ect
haha my bad thats my CAL from ages ago LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 199
- Joined: Wed Nov 09, 2011 5:35 pm
- cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor - Location: Victoria
Re: Vp nvram offsets and ect
I couldnt get it to work with the offset thing so i did some research and worked out how to stack the bin and away it went. Usb is now working and can emulate ect. Having trouble with the adx crashing tunerpro when i try connect ( i may have changed something trying to get it working im not sure) the e85 adx worked though
I started with the standard bib and changed a few things and will start tunning when we get it to a Dyno.
Thanks for the help guys!
I started with the standard bib and changed a few things and will start tunning when we get it to a Dyno.
Thanks for the help guys!
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vp nvram offsets and ect
if you think you might have changed something in the adx, just get a fresh copy. It probably is the case.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 19
- Joined: Fri Jul 06, 2012 2:42 pm
- cars: turbo v6 vp drag car
Supercharged v6 vx
Vl 308
Re: Vp nvram offsets and ect
big thanks to jervies god this stuff does ya head in sometimes.