Willem prgrammer on windows 7

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
Post Reply
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Willem prgrammer on windows 7

Post by Dazza92VP »

just wondering if anyone has managed to sort out the problem of using a willem programmer with windows 7 64bit just keeps coming up with hardware error. problem is this is the only computer with a lpt port but its running windows 7 64
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: Willem prgrammer on windows 7

Post by Dazza92VP »

ok its all good just found TVicport and turned off run in compat mode and its running fine
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Willem prgrammer on windows 7

Post by antus »

curious, which willem? a parallel port one, or a gq-4x? My gq-4x works fine on win 7 running normally.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: Willem prgrammer on windows 7

Post by Dazza92VP »

parallel just wouldnt detect it but ive been getting good reads now
Post Reply