IHi all,
I have downloaded tunerpro and a xd file and bin file.
How do I view these in tunerpro ?
how to run tuner pro?
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: how to run tuner pro?
i assume you have installed tunerpro.
xdf menu to load the xdf file
file menu to load the bin, then expand the parameters treee to see all the stuff you can edit.
xdf menu to load the xdf file
file menu to load the bin, then expand the parameters treee to see all the stuff you can edit.
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: how to run tuner pro?
whats the most common thing to adjust first?
very new to this thought of thing.
very new to this thought of thing.
-
Helical
- Posts: 152
- Joined: Mon Jul 04, 2011 8:37 pm
- cars: 2000 HSV VS Series 3 Maloo
1995 Holden VS V6 3 seat ute (bunky)
1997 Holden VS S Pak Ute (wreck) - Location: SOR, WA
Re: how to run tuner pro?
Simplest thing to adjust to see if you are doing it right is to bump the idle rpm up a bit. Easy to tell if the change is successful, unlikely to damage anything and easy to change back.
There are some how too's on tuning with MAP systems in here https://pcmhacking.net/forums/viewtopi ... =28&t=1089
Troy (also a newbie)
There are some how too's on tuning with MAP systems in here https://pcmhacking.net/forums/viewtopi ... =28&t=1089
Troy (also a newbie)