Vs l67 memcal questions

[Damienharris]

Hi I have finally got a aldl USB cable to fit my laptop with Efi tuner v4 and tuner pro v4 rt . I plugged it all into my car and it couldn't read any data it is a vs ecu connected to a vx l67 engine do I need to download a certain bin file so I can access data. Sorry if my questions are abit unsure but just staring to learn the computer side off thing and have been reading up as much as I can but just starting it is a bit off a process to learn everything any feedback or help would be appreciated

[antus]

You need tunerpro 5 rt, and the right adx file loaded under aquisition. Then setup the right com port and connect with ignition on.

[Damienharris]

I can download tunerpro v5. Which adx file do I need to get for a vs supercharged l67 engine out off a vx but the ecu is vs 16210672. 3.8l man pcm 16231438 bstj.

[antus]

vx s/c v6 engine and trans from this thread: http://pcmhacking.net/forums/viewtopic.php?f=10&t=29

[Damienharris]

Thanks for the help will go thru and download the bin files I need and will update once I have made some progress

[antus]

Sorry when I posted above I did not realise I was on page 2 and didnt realise we were talking kalmaker. The above adx may or may not work. kalmaker can be a bit of a pain to work with unless you have the kalmaker software and a really old laptop.

[VL400]

Can also try the flashtool to suck the cal and part of the bin as it supports most Kalmaker models. Use the vehicle setting "VS Eco or S/C in Vehicle"

[Damienharris]

hi I was doing some data logging on my car when this error came up would anyone be able to help me out.
39:58.165: Send: $F5,$57,$01,$00,$B3
39:58.176: Error: Max232 echo: $F1,$58,$0E,$01,$00,$A8 did not match command: $F5,$57,$01,$00,$B3
39:58.189: Error: Reply frame checksum failure

[antus]

looks like a packet from another device (F1 instead of the echo for the request to F5). are the logs otherwise working?

[Damienharris]

Hi I have done some logging on efi live and the stft right hand side is always maxed out and in the red and also the right hand side 02 sensor doesn't read anything and never changes. Would this mean it has a problem with the right hand side O2 sensor and causing the car to lean out the mixture any help would be appreciated. Also getting fault code 35, 44 and 76