Does anybody know if Winbond chips are OK?

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
User avatar
vlad01
Posts: 7801
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Does anybody know if Winbond chips are OK?

Post by vlad01 »

Sorry I should of made that more clear.

I got 2 bonus fakes one to play with, when ever the package arrives lol.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Charlescrown
Posts: 1833
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: Does anybody know if Winbond chips are OK?

Post by Charlescrown »

Got some from Honk Kong. Second hand 70ns for a little over $20 posted for 10. If the pic they used is anything to go off they should be Genuine.
Have you seen the price for the Ventrinox Tech 2 from UOBD2. $310 with Holden 32mb card. I am still trying to get a firm postage cost out of them.
Charlescrown
Posts: 1833
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: Does anybody know if Winbond chips are OK?

Post by Charlescrown »

Winbonds arrived today so I tried one. My memcal reader/writer gave a message that said please check pins etc as well as saying some chips may have compatible chip ID Continue so I did and it programmed well so in the car and works fine. Price was right $2.60 each posted. They are 512K and 45ns with Taiwan in a small circle on the underside.
User avatar
vlad01
Posts: 7801
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Does anybody know if Winbond chips are OK?

Post by vlad01 »

I had the same problem. in device, choose the actual manufacture winbond and choose the part number.

chips of different manufacture can have different programing sequence if thats the right terminology?

After selecting the correct one it programed perfect with no messages.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Charlescrown
Posts: 1833
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: Does anybody know if Winbond chips are OK?

Post by Charlescrown »

Thanks. I just went back and picked that eprom and its perfect. I tried before to put the number in but it kept reverting back to SST27C512 for some silly reason but when I scrolled through and found the specific chip it works great. Thanks
User avatar
antus
Site Admin
Posts: 8253
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Does anybody know if Winbond chips are OK?

Post by antus »

Can you post up details of the seller?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Charlescrown
Posts: 1833
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: Does anybody know if Winbond chips are OK?

Post by Charlescrown »

Post Reply